| Products > Test Equipment |
| SDS1104X-E Directly Connection to the PC via LAN cable |
| << < (2/2) |
| tautech:
--- Quote from: elefurtronik on January 14, 2023, 09:32:23 am ---I personally didn‘t like the siglent web interface or easyscopex. I cant use it like my oscilloscope easily. --- End quote --- The webserver is a superior remote interface to EasyScopeX and when forced to use it you will find it different to using the physical controls but it does offer all the same functionality and more. However it sometimes does not play well with some display resolutions so if forced to change from your native resolution it may be unsuitable for some. This what it looks like when the control panel is popped out showing the additional virtual buttons: Here's a little rundown on using the webrowser with a password if you require such. https://siglentna.com/operating-tip/sds1004xe-browser-password-user-name/ |
| elefurtronik:
Mine doesn’t look like this. I will check again. I also have an interface but it is a little bit slow and not easy to adjust trigers, axis and so on. Button turn function is not convinient for me. |
| PatrickB:
@tautech, my interface is different, the buttons are flat (no 3D effect), there is an extra button (FileConverter), "Setup" is written correctly and the buttons at the bottom left are not properly aligned with their designations. Nothing is very important but why this difference? My software version is 8.2.6.1.37R9. The black "Setup" button on a black background, that's not good. :( |
| tautech:
--- Quote from: PatrickB on January 19, 2023, 03:40:51 pm ---@tautech, my interface is different, the buttons are flat (no 3D effect), there is an extra button (FileConverter), "Setup" is written correctly and the buttons at the bottom left are not properly aligned with their designations. Nothing is very important but why this difference? My software version is 8.2.6.1.37R9. The black "Setup" button on a black background, that's not good. :( --- End quote --- The orange button are virtual ones only available in the webserver. The File Convertor was a feature added after that video and it's a small SW tool to convert BIN to CSV. It's also in the Save/Recall menu. Button alignment I hadn't noticed before which might be the device you are connect to IDK. To permit use on touch devices (tablets) LH and RH rotation buttons were added and I always thought it a shame any rotational knob couldn't be just hovered over with a mouse to use with the scroll wheel. When HQ are back from CNY I might suggest they polish the webserver some more. |
| BillyO:
--- Quote from: tautech on January 19, 2023, 07:03:28 pm ---When HQ are back from CNY I might suggest they polish the webserver some more. --- End quote --- That would be awesome. :-+ |
| Navigation |
| Message Index |
| Previous page |