Products > Test Equipment

SDS1104X-E Directly Connection to the PC via LAN cable

(1/2) > >>

elefurtronik:
Hello,
I would like to connect my SDS1104X-E  directly to my PC via LAN cable. I also don't know how to reach my oscilloscope over the web browser. What is the IP address to reach my Osci?

thm_w:
Please read the manual before making a thread here: https://siglentna.com/USA_website_2014/Documents/UserManual/SDS1000X&Xplus_UserManual_UM0101X-E02A.pdf
"To Set the LAN" pg 159
or use USB.

themadhippy:
RTFM https://siglent.co.uk/jg/wp-content/uploads/2021/08/Siglent-SDS1000X-E-U-Oscilloscope-UserManual.pdf  page 192 tells you al you need to know

rf-loop:
It would be good manners to link to the latest manual. It is usually most certainly found on the manufacturer's own website.

Besides, that first one was even a manual for the wrong oscilloscope model. (discontinued 1000X/X+ series)

This is currently the latest in public distribution for SDS1000X-E series and SDS1000X-U:
Including also SDS1000X-E  4-channel models: Data logger and Counter functions, added 2021 with FW 6.1.37R2 .

https://www.siglenteu.com//wp-content/uploads/dlm_uploads/2021/08/SDS1000X-ESDS1000X-U_UserManual_EN05B.pdf

elefurtronik:
Thanks for all the answers. From ipconfig I took my ip address x.x.x.y and submask number. After that I entered this ip addres(x.x.x.(y+1)) to oscilloscope with exactly same submask. After that I installed Ni Visa and EasyScopex. I think I dont need EasyScopeX. I personally didn‘t like the siglent web interface or easyscopex. I cant use it like my oscilloscope easily.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod