| Products > Test Equipment |
| Siglent SDS2000X Plus Bandwidth & Aliasing Application Note |
| << < (4/9) > >> |
| knudch:
The naming scheme: 2104 = 100MHz 2204 = 200MHz 2354 = 350MHz 2504 = 500Mhz Give sense... ;) So far as I remember it changes type each time I applied the BW options 100=>200=>350=>500 |
| tautech:
--- Quote from: knudch on January 05, 2022, 08:18:37 pm --- --- Quote from: Performa01 on January 05, 2022, 07:08:11 pm --- --- Quote from: bdunham7 on January 05, 2022, 06:24:47 pm --- --- Quote from: Performa01 on January 05, 2022, 05:59:10 pm ---There is no such thing as an SDS2504X Plus: --- End quote --- What does your scope identify itself as in the system menu? --- End quote --- Unsurprisingly it says: "SDS2354X Plus". The model name in the screenshots also comes from the scope itself. --- End quote --- My SDS2104X+ with "features" say SDS2504X plus in system menu --- End quote --- Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu. Maybe other members need also confirm this. |
| Performa01:
--- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu. --- End quote --- Do these scopes display the 500 MHz option in the options menu? |
| tautech:
--- Quote from: Performa01 on January 05, 2022, 09:00:01 pm --- --- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu. --- End quote --- Do these scopes display the 500 MHz option in the options menu? --- End quote --- Available BW options are only applicable to the model the scope already is. As BW lifts from option installation the next BW upgrade option becomes visible. See last screenshot here: https://www.eevblog.com/forum/testgear/siglent-sds2000x-plus-hack/msg3822731/#msg3822731 |
| Solacity:
--- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu. Maybe other members need also confirm this. --- End quote --- My 'upgraded' SDS2104X Plus identifies as "SDS2504X Plus" in the 'Utility | Menu | System Settings | System Status' screen. The options menu no longer shows the 500 Mhz or any other bandwidth option. FYI... Performa, very nice work! Following it with great interest. -Rob- |
| Navigation |
| Message Index |
| Next page |
| Previous page |