Products > Test Equipment

Siglent SDS2000X Plus Bandwidth & Aliasing Application Note

<< < (4/9) > >>

knudch:
The naming scheme:
2104 = 100MHz
2204 =  200MHz
2354 =  350MHz
2504 =  500Mhz

Give sense... ;)

So far as I remember it changes type each time I applied the BW options 100=>200=>350=>500

tautech:

--- Quote from: knudch on January 05, 2022, 08:18:37 pm ---
--- Quote from: Performa01 on January 05, 2022, 07:08:11 pm ---
--- Quote from: bdunham7 on January 05, 2022, 06:24:47 pm ---
--- Quote from: Performa01 on January 05, 2022, 05:59:10 pm ---There is no such thing as an SDS2504X Plus:

--- End quote ---

What does your scope identify itself as in the system menu? 

--- End quote ---
Unsurprisingly it says: "SDS2354X Plus". The model name in the screenshots also comes from the scope itself.

--- End quote ---

My SDS2104X+ with "features" say SDS2504X plus in system menu

--- End quote ---
Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu.
Maybe other members need also confirm this.

Performa01:

--- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu.

--- End quote ---
Do these scopes display the 500 MHz option in the options menu?

tautech:

--- Quote from: Performa01 on January 05, 2022, 09:00:01 pm ---
--- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu.

--- End quote ---
Do these scopes display the 500 MHz option in the options menu?

--- End quote ---
Available BW options are only applicable to the model the scope already is. As BW lifts from option installation the next BW upgrade option becomes visible.
See last screenshot here:
https://www.eevblog.com/forum/testgear/siglent-sds2000x-plus-hack/msg3822731/#msg3822731

Solacity:

--- Quote from: tautech on January 05, 2022, 08:54:56 pm ---Yes, AFAIK SDS2354X+ with the 500 MHz BW SDS2000XP-4BW05 option applied should display SDS2504X+ in the system menu.
Maybe other members need also confirm this.

--- End quote ---

My 'upgraded' SDS2104X Plus identifies as "SDS2504X Plus" in the 'Utility | Menu | System Settings | System Status' screen.
The options menu no longer shows the 500 Mhz or any other bandwidth option.

FYI...

Performa, very nice work! Following it with great interest.

-Rob-

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod