Products > Test Equipment

SDS800X HD Wanted Features

<< < (133/145) > >>

electronics hobbyist:

--- Quote from: eTobey on April 28, 2024, 07:10:12 pm ---I wonder how many use these buttons (see picture). You can move the fields by simply dragging them, so i would say these buttons are redundant. They would cover a field that you could otherwise click without moving the fields at all.

--- End quote ---

Dragging is implicit, while arrows are explicit, and also said that there is information on the left and right, I think this is part of the reasons for retaining the arrow.For first-time users or users of the mouse, this arrow is necessary.

eTobey:
Feature suggestion:
When choosing max frames for sequence, and changing the timebase, the lowest frames that were possible on the timebase persists, even when timebase changed back.

Suggested behaviour:
A number that has been entered or when choosed max, should always be set if possible. Maybe have 2 fields that says "frames set up" and "current frames" (max frames that can be setup) in the menu.

eTobey:

--- Quote from: tautech on April 28, 2024, 09:54:12 pm ---
--- Quote from: eTobey on April 28, 2024, 09:48:08 pm ---How about making the tabs a tiny bit smaller too?

--- End quote ---
Not possible without sacrificing space needed for indication of channel settings.
BW limit, Hidden (but active) etc.

--- End quote ---

Based on your information, and what i found in the manual the statement "Not possible" is wrong. See picture.

eTobey:

--- Quote from: KungFuJosh on April 28, 2024, 11:28:49 pm ---
--- Quote from: eTobey on April 28, 2024, 09:48:08 pm ---
--- Quote from: tautech on April 28, 2024, 07:44:17 pm ---Any advanced user with some active Math channels.

--- End quote ---
A few more words would have been useful, and would have sounded much nicer...

--- End quote ---

From the guy who always tells me he prefers short answers to long winded ones. 😉😉

--- End quote ---
The guy, that knows about the difference between sentences, paragraphs and chapters...

What about staying on the technical side, huh?

Mortymore:

--- Quote from: eTobey on April 29, 2024, 07:30:26 am ---
--- Quote from: tautech on April 28, 2024, 09:54:12 pm ---
--- Quote from: eTobey on April 28, 2024, 09:48:08 pm ---How about making the tabs a tiny bit smaller too?

--- End quote ---
Not possible without sacrificing space needed for indication of channel settings.
BW limit, Hidden (but active) etc.

--- End quote ---

Based on your information, and what i found in the manual the statement "Not possible" is wrong. See picture.

--- End quote ---

It would loose readability in a 7" display that it's not that big. Cram the information in the display, just because it fits, it's not a good design interface.

That's one thing that I would have liked to see in the 800X-HD, with the same form factor as the 1000X-E, but that has lost the navigations buttons near the display, in favour of a touch-screen, that as release some space to fit an 8" screen. But one have to consider that with all those "small improvements", the cost would increase, hence the difference price for the 1000X-HD.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod