EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: Mandokahn on June 21, 2022, 04:36:07 pm

Title: Searching for Operator/Programming Manual PDF for Tektronix DM2510G Multimeter
Post by: Mandokahn on June 21, 2022, 04:36:07 pm

I am owning some elder Multimeters from different brands.
For my Tektronix DM2510G I recently buyed I can't find any manual in the net.
Tek is explaining the DM2510G is an OEM model and they don't have any documents to provide....

I like to use this DMM with its built in GPIB interface for data acquisition but need some manual to get is working.

So I hope that someone within eevblog uses this DMM and has a PDF available for me.

Thanks a lot  :)

Klaus

Title: Re: Searching for Operator/Programming Manual PDF for Tektronix DM2510G Multimeter
Post by: Kean on June 21, 2022, 05:05:41 pm

No manuals for you, but that would be one of three DMMs which were built for Tek by Escort Instruments Corp. in Taiwan.
A comparison of the three DMM models is in the catalog pages you can download from https://w140.com/tekwiki/wiki/DM2510
User and service manuals for the CDM250 are available from https://w140.com/tekwiki/wiki/CDM250 and the service manual mentions Escort (but probably very different internally to the DM2510).

Title: Re: Searching for Operator/Programming Manual PDF for Tektronix DM2510G Multimeter
Post by: Kean on June 21, 2022, 05:13:31 pm

FYI, the DM2510G DMM GPIB Programmer Manual is Tek P/N 070-8630-00.  My searches for that didn't bring up anything useful other than an old eBay HK listing.