Products > Test Equipment

Semirandom but careful mistakes

(1/3) > >>

tv84:
Some people have been asking for some mistakes regarding the SSA3015XPlus and SVA1015X models.

If anyone has succeeded in this crossflash, please put it here.

Maybe I'll have a look one of these days...

tv84:
ATTENTION: This is an untested procedure so proceed at your own risk.

It's an adaptation of the successful procedure used to crossflash the SSA3032X+ into SVA3032X.

Procedure to try crossflash from SSA3015X+ to SVA1015X:

--- Code: ---1. Telnet into the SSA3015X+
2. rename
   /usr/bin/siglent/ecomb_p
   to
   /usr/bin/siglent/ecomb
3. in file /usr/bin/siglent/startup_app.sh change the line
   /usr/bin/siglent/ecomb_p &
   to
   /usr/bin/siglent/ecomb &
4. in file /usr/bin/siglent/config/NSP_config_upgrade_info.xml change the line
   <upgrade_static_id>11407</upgrade_static_id>
   to
   <upgrade_static_id>11402</upgrade_static_id>
5. Sync and Reboot
6. If everything is OK, now you can update your SSA with the latest SVA1015X stock FW.
7. After having flashed your first SVA stock FW, the SSA has become a "true" SVA.

As always: do it at your own risk.
--- End code ---

The script to open telnet at port 10101 is attached.

BEFORE STARTING THE OPERATION YOU SHOULD DO A FULL NAND BACKUP.


When flashing the stock SVA FW, use at least this FW version. Previous versions may get you into trouble.

Elasia:

--- Quote from: tautech on December 10, 2020, 06:59:21 pm ---
--- Quote from: Elasia on December 10, 2020, 04:38:36 pm ---Buyer beware, looking at the datasheets this should be converted into an SVA3021+ or 32+.. the 15 does not look like the same hardware so if someone does that you may get unexpected results trying to run it at 1.5GHz license mode

Also of note.. the tracking gen mysteriously goes to 3.2GHz

https://siglentna.com/product/ssa3015x-plus/

--- End quote ---
IMHO this is a serious misleading mistake in NA's shop page.  :palm:

No where in any datasheet is it specified SSA3015X Plus TG will do 3.2 GHz !
https://siglentna.com/wp-content/uploads/dlm_uploads/2020/02/SSA3000X-Plus_DataSheet_DS0703P_E03A.pdf

--- End quote ---

More than misleading... the pdf side by side shows a completely different spec..  I recant my earlier post

compare both pdf spec sheets side by side.. the SSA3015X+ should be the same hardware as the SVA1015X

https://siglentna.com/wp-content/uploads/dlm_uploads/2020/02/SVA1000X_DataSheet_DS0701X_E04A.pdf

tautech:

--- Quote from: tautech on December 10, 2020, 06:59:21 pm ---
--- Quote from: Elasia on December 10, 2020, 04:38:36 pm ---Buyer beware, looking at the datasheets this should be converted into an SVA3021+ or 32+.. the 15 does not look like the same hardware so if someone does that you may get unexpected results trying to run it at 1.5GHz license mode

Also of note.. the tracking gen mysteriously goes to 3.2GHz

https://siglentna.com/product/ssa3015x-plus/

--- End quote ---
IMHO this is a serious misleading mistake in NA's shop page.  :palm:

No where in any datasheet is it specified SSA3015X Plus TG will do 3.2 GHz !
https://siglentna.com/wp-content/uploads/dlm_uploads/2020/02/SSA3000X-Plus_DataSheet_DS0703P_E03A.pdf

--- End quote ---
One email to the US and it's been fixed already ! :phew:  ;D
Time now to clean some posts.

tv84:
Curiosity:

Product IDs:
11401 - SVA initial models
11402 - SVA1015X
11403 - SVA1032X
11404 - SVA1075X
11405 - SSA3032X+
11406 - SSA3075X+
11407 - SSA3015X+   <- Wasn't Siglent initially planning on releasing this one?
11408 - SSA3000X-R
11409 - ? ? ?
11410 - SVA1000X    (with V3.2.2.4.0 FW and up)  all models
11411 - SSA3000X+    (with V3.2.2.4.0 FW and up)  all models
11412 - SSA3000X-R   (with V3.2.2.4.0 FW and up)  all models

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod