| Products > Test Equipment |
| Should buy R&S RTM3K-54PK or Siglent SDS6034 H10 Pro(X)SDS6054A(O)? |
| << < (7/9) > >> |
| Minki:
--- Quote from: tautech on November 07, 2022, 02:54:26 am --- Sorry, SDS6204A. |O Here's a quick snap of the 4 different decode outputs, Binary, Decimal. Hex and ASCI. Now it's out on the bench do you wanna see some decodes ? I only have the Siglent STB3 test board with I2C, CAN, UART, SPI and LIN. --- End quote --- Of course want to see :-+ :-+ Please also test : 1.will LIN display error when suddenly pull out the board? 2.Really not support 9bit RS485? Thank's |
| tautech:
--- Quote from: Minki on November 07, 2022, 03:10:55 am --- --- Quote from: tautech on November 07, 2022, 02:54:26 am --- Sorry, SDS6204A. |O Here's a quick snap of the 4 different decode outputs, Binary, Decimal. Hex and ASCI. Now it's out on the bench do you wanna see some decodes ? I only have the Siglent STB3 test board with I2C, CAN, UART, SPI and LIN. --- End quote --- Of course want to see :-+ :-+ Please also test : 1.will LIN display error when suddenly pull out the board? 2.Really not support 9bit RS485? Thank's --- End quote --- 1. The decode list will vanish unless it is captured with Stop or some Single Trigger setting. 2. Don't know, haven't looked only seen what 2N3055 wrote. We may have slightly different FW between Pro and A models, IDK. Will put something up in a few hours.......other things to do. |
| Minki:
--- Quote from: tautech on November 07, 2022, 03:19:58 am --- 1. The decode list will vanish unless it is captured with Stop or some Single Trigger setting. 2. Don't know, haven't looked only seen what 2N3055 wrote. We may have slightly different FW between Pro and A models, IDK. Will put something up in a few hours.......other things to do. --- End quote --- Like LIN had checksum...will 6000A display/notify if the checksum error....? Or some case is mcu hang up during send out 8bit UART,I2C.....the send not finish..will 6000A display/notify there had a error...? Many Thank's |
| tautech:
Some I2C for your study. H Position left at 0s whereas we might instead position it left for decoding where we can also lock it for it to be not influenced by timebase settings. Nothing stopped, everything captured on the fly with only a simple Edge trigger plus some Holdoff to prevent retriggering within a packet. One capture, #5 showing the List with 100 packets decoded which we can view anywhere in the list with the scrollwheel on the wireless mouse Siglent provide with these scopes. You want some UART and LIN next ? |
| Minki:
--- Quote from: tautech on November 07, 2022, 06:16:59 am ---Some I2C for your study. H Position left at 0s whereas we might instead position it left for decoding where we can also lock it for it to be not influenced by timebase settings. Nothing stopped, everything captured on the fly with only a simple Edge trigger plus some Holdoff to prevent retriggering within a packet. One capture, #5 showing the List with 100 packets decoded which we can view anywhere in the list with the scrollwheel on the wireless mouse Siglent provide with these scopes. You want some UART and LIN next ? --- End quote --- Yes please ;D ;D ;D ;D :-+ :-+ |
| Navigation |
| Message Index |
| Next page |
| Previous page |