Products > Test Equipment
Should buy R&S RTM3K-54PK or Siglent SDS6034 H10 Pro(X)SDS6054A(O)?
Minki:
I am think to buy R&S RTM3K-54PK or Siglent SDS6034 H10 Pro hope can get some suggestion....
(70% hobby use 30% job use)
Price:
RTM3K-54PK Full Package € 7,860(May be need € 200 shipping)
SDS6034 H10 Pro RMB 48880~~ € 6,795
SDS6054A € 6,480<-Win
Siglent cheap about €1400
Sample rate:
RTM3K-54PK 500MHz <-Win
SDS6034 H10 Pro 350MHz
SDS6054A 500MHz<-Win
I haven't seen SDS6000 pro had BW and bit hack?
6000A had 2G hack?
Memory:
RTM3K-54PK 80M
SDS6034 H10 Pro 500M<-Win
SDS6054A 500M<-Win
Other:
RTM3K-54PK Come with SG and logic probe <-Win
SDS6034 H10 Pro Need but signal gen and DIY logic probe
SDS6054A Had 2G hack?
If SDS 6000 pro can be hack of course buying Siglent ...but if it can't does RTM3K-54PK is a good chose?
(Why R&S can't be hack :'( :'( :'()
(R&S measure result more reliable?)
Or should waiting MXO4 had a pomo?(Option is important than BW....)
nctnico:
If you are going to do protocol decoding then go for the R&S for sure. Protocol decoding on the RTM3004 is a real joy to use.
Either way, it is best to just try both scopes so you can compare by yourself. If you buy a car, you take it for a test drive. The same goes for test equipment in this price range. Just make sure to prepare some test scenarios that are representative for the work you do. Otherwise you'd be twiddling some knobs and still not get a feel for which instrument is most useful to you.
pdenisowski:
--- Quote from: nctnico on November 02, 2022, 11:23:15 am ---If you are going to do protocol decoding then go for the R&S for sure. Protocol decoding on the RTM3004 is a real joy to use.
--- End quote ---
I actually made a short video showing basic setup and decode of UART on the RTM
nctnico:
There is one thing you don't show in your video and that is the automatic rotation of the text inside the balloons holding the data. It will rotate if the bus decode trace is high enough. This allows to get much more information on the screen and makes it easier to get a good overview of what is going on. Needless to say I like that feature a lot. I'm not aware other oscilloscopes do this.
tautech:
--- Quote from: Minki on November 02, 2022, 03:52:32 am ---I am think to buy R&S RTM3K-54PK or Siglent SDS6034 H10 Pro hope can get some suggestion....
(70% hobby use 30% job use)
Price:
RTM3K-54PK Full Package € 7,860(May be need € 200 shipping)
SDS6034 H10 Pro RMB 48880~~ € 6,795<-Win
Siglent cheap about €1200
Sample rate:
RTM3K-54PK 500MHz <-Win
SDS6034 H10 Pro 350MHz
I haven't seen SDS6000 pro had BW and bit hack?
Memory:
RTM3K-54PK 80M
SDS6034 H10 Pro 500M<-Win
Other:
RTM3K-54PK Come with SG and logic probe <-Win
SDS6034 H10 Pro Need but signal gen and DIY logic probe
If SDS 6000 pro can be hack of course buying Siglent ...but if it can't does RTM3K-54PK is a good chose?
(Why R&S can't be hack :'( :'( :'()
(R&S measure result more reliable?)
Or should waiting MXO4 had a pomo?(Option is important than BW....)
--- End quote ---
Welcome to the forum.
FYI H10 Pro models are not available to the west.
Instead SDS6000A models are which provide 5 GSa/s (10 GSa/s ESR) per channel and 500 MPts memory with models of 500MHz, 1 or 2 GHz.
To answer you other question, our SDS6204A now magically has all options permanently installed. ;)
However FYI, SDS5000X is under promotion (as some other models are too) with free option bundles and BW upgrades that amount to considerable savings.Memory depth, while not the immense 500 Mpts is still a healthy 250 Mpts.
Promo details:
https://int.siglent.com/info/detail-62.html
Navigation
[0] Message Index
[#] Next page
Go to full version