| Products > Test Equipment |
| Show Us Your Curve Tracer |
| << < (22/35) > >> |
| david77:
Here's my copy of the ELV KS7000. It works quite well and has turned out to be a useful tool for the workshop when fixing stuff. Hooking up devices with clip leads was not only very messy and annoying, it also resulted in nasty oscillations. So I decided to go the Tektronix route and made up a testfixture. So far I've got this one that works for small & medium power transistors. I've got parts on order to make another one for TO3 packages. This works very well so far. Certainly no Tek but ok for me. |
| Neomys Sapiens:
I posted some of my initial experiences with the Peak Electronics DCA75 here: https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/msg3530794/#msg3530794 ,here: https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/msg3671740/?topicseen#msg3671740 and here: https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/msg3503112/?topicseen#msg3503112 Besides this, I have the model 3110 from Vu-Data corp., which seems to be a (licensed?) copy of an earlier Huntron model, maybe tre Tracker 1000. |
| AaronLee:
--- Quote from: david77 on October 10, 2021, 08:52:03 pm ---Here's my copy of the ELV KS7000. It works quite well and has turned out to be a useful tool for the workshop when fixing stuff. Hooking up devices with clip leads was not only very messy and annoying, it also resulted in nasty oscillations. So I decided to go the Tektronix route and made up a testfixture. So far I've got this one that works for small & medium power transistors. I've got parts on order to make another one for TO3 packages. This works very well so far. Certainly no Tek but ok for me. --- End quote --- Wow, impressive! |
| Messtechniker:
--- Quote from: david77 on October 10, 2021, 08:52:03 pm --- Hooking up devices with clip leads was not only very messy and annoying, it also resulted in nasty oscillations. --- End quote --- Had the same problem with my DL4JAL curve tracer. :scared: Fitting a small ferrite bead in the collector line fixed that. :-+ |
| david77:
--- Quote from: Messtechniker on October 11, 2021, 06:19:30 am ---Had the same problem with my DL4JAL curve tracer. :scared: Fitting a small ferrite bead in the collector line fixed that. :-+ --- End quote --- Yes, I did the same inside my fixture. Killed all the nasties instantly. |
| Navigation |
| Message Index |
| Next page |
| Previous page |