| Products > Test Equipment |
| Show Us Your Curve Tracer |
| << < (27/35) > >> |
| Cubdriver:
--- Quote from: KungFuJosh on November 21, 2021, 04:59:24 am ---For anybody interested, I'm going to order some more PIC chips to program, and then I'll get 5 to 10 kits ready. Initially they won't have anything on the boards, so I suggest anybody interested has or develops some SMT skills before proceeding with this set. For the future, I'm getting quotes on PCBA service to cover the 5 smaller SMT parts (there's also a couple larger ones setup for easy hand soldering that don't need any special skills). Thanks, Josh --- End quote --- I'm definitely interested. -Pat |
| KungFuJosh:
--- Quote from: Shock on November 21, 2021, 06:02:53 am ---Please start a thread in the projects forum. --- End quote --- Done. Here's the new thread: https://www.eevblog.com/forum/projects/project-vacuum-tube-curve-tracer-(the-futracer)/new/#new Thanks, Josh |
| lugaw:
--- Quote from: jjoonathan on March 04, 2021, 08:19:50 pm ---SMU gang represent! (glances to the left, then to the right -- coast is clear, SPA gang isn't around yet) Custom 3D printed feet and "panel" (bar) turn this SMU into a convenient bench tool. Actual work is done in jupyterlab / holoviews / pyvisa-py. --- End quote --- Please share the STL of your custom feet, I need it on my picoammeter. Thanks! |
| Roehrenonkel:
Hi, At https://jacmusic.com/Tube-testers/index.html you can find under No.10 most of the digital/PC-controlled curve-tracers for tubes. Have tried some but nothing is perfect. What i wanted is more accuracy and flexibility. More than the kit that calls itself "professional tube testing system" in germany. Not even grid-current measurement possible there. Nice software but Windows-only. So i put some VXI-modules (16 Bit DAC +-40V, seven voltmeters and a PSU) together with a selfmade relay-matrix 4-In 16-Out and some GPIB-Powersupplys. For now controlled by Agilent-HP-VEE, would like to do that from my Raspberry. Have also checked transistors and LEDs with it, just depends on the controll-software and power-sources. |
| jjoonathan:
--- Quote from: lugaw on November 25, 2021, 01:20:20 pm --- --- Quote from: jjoonathan on March 04, 2021, 08:19:50 pm ---SMU gang represent! (glances to the left, then to the right -- coast is clear, SPA gang isn't around yet) Custom 3D printed feet and "panel" (bar) turn this SMU into a convenient bench tool. Actual work is done in jupyterlab / holoviews / pyvisa-py. --- End quote --- Please share the STL of your custom feet, I need it on my picoammeter. Thanks! --- End quote --- Whoops I must have missed this last time. Here they are! |
| Navigation |
| Message Index |
| Next page |
| Previous page |