Products > Test Equipment
Show us your noise floor
Jay_Diddy_B:
Hi group,
The recent introduction of the Keysight HD3 series of oscilloscopes has prompted a discussion on noise floor.
Please share your oscilloscope's noise floor here.
To get this started:
Tektronix MSO46 4-BW-500
Sample mode, full bandwidth, 1mV/div
Hi-Res Mode 1mV/div
Hi-Res Mode 5mV/div
Regards,
Jay_Diddy_B
Jay_Diddy_B:
Hi, adding to the thread
Tektronix MSO24 2-BW-500
This scope does not have an internal 50 \$\Omega\$ termination. This is with input open.
And with the high-res mode turned on:
Regards,
Jay_Diddy_B
Jay_Diddy_B:
Hi,
Tektronix MDO4104-3 1 GHz scope
And with the high-res mode on:
Regards,
Jay_Diddy_B
Jay_Diddy_B:
Hi,
Agilent DSO-X 3034A (with BW50 500 MHz option)
And with the high resolution turned on:
I have run out of scopes. Please share yours :D
Regards,
Jay_Diddy_B
sonpul:
Siglent SDS1202X-E
Navigation
[0] Message Index
[#] Next page
Go to full version