Products > Test Equipment
Siglent SDS1104X-E noisy fan replacement
Neutrion:
Hi AdiGital!
Do I see it right that the Rubycon caps are gone in the power supply? When was your scope built? What kind of caps do you have?
When I measured the FPGA heatsink with the original cooling in a closed house, the FPGA temp was much higher than that (Don't remember right but around 50-60 degree Celsius) and the ADC also around 60.
Are you sure that you attached the probes right? I measured it with a BM789 with original probes, and didn't even stick it to the metal correctly.
Would be an interesting experiment to see whether the ADC would might be less noisier with a heatsink and much lower temp. Did you try to not to destroy the warranty sticker?
ceut:
--- Quote from: tautech ---
--- End quote ---
Hello !
Thanks to @tautech, I have bought a brand new Siglent SDS1104X-E but super noisy fan :-[
I use it at home for hobby, I live in a small apartement without any garage or lab, so this one is really annoying me :-\
He gaves me the link to this topic, so I have just tearing down my DSO to lower the fan voltage which seems to be the only solution available.
Here are some photos of the beginning of the teardown.
>I use my (great and beautiful 8) ) Xiaomi Soccas hairdryer to remove the sticker :-+
>Then doing some maths to get the 9V power with my Siglent silent ;) PSU
Now thinking about which solution I will use inside it, without doing any irreversible mods for the 3-years warranty.
So I will post my thought later....
tautech:
At just 57mA fan draw use a LM7809 or LM78L09.
Best to KISS. ;)
Muttley Snickers:
--- Quote from: ceut on March 18, 2022, 09:05:51 pm ---Thanks to @tautech, I have bought a brand new Siglent SDS1104X-E but super noisy fan :-[
--- End quote ---
:palm:
ceut:
--- Quote from: Muttley Snickers on March 18, 2022, 09:53:44 pm ---
--- Quote from: ceut on March 18, 2022, 09:05:51 pm ---Thanks to @tautech, I have bought a brand new Siglent SDS1104X-E but super noisy fan :-[
--- End quote ---
:palm:
--- End quote ---
I was saying Thanks for Tautech to helping me to choose between Rigol anns Siglent models, and give me this topic link ;)
Not for the noisy fan: that was a big (and bad) surprise when I switched it on yesterday for the first time ...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version