Products > Test Equipment
Siglent - 11/20 - New SDS1104X-U, 4 channel 100MHz, 1Gsa/s economy oscilloscope
(1/32) > >>
Elasia:
Edit: Now with comparison pics, thanks Dave!

SDS1104X-U
$399.00

100 MHz bandwidth
Real-time sampling rate up to 1 GSa/s
Record length up to 14 Mpts
Serial bus triggering and decoder supports protocols I2C, SPI, UART, CAN, LIN
Advanced measurements on full memory (14 Mpts)
Large 7-inch TFT-LCD display with 800 * 480 resolution

SIGLENT’s SDS1000X-U Series Super Phosphor Oscilloscopes is available in one bandwidth, 100 MHz. It has a maximum sample rate of 1 GSa/s and a maximum record length of 14 Mpts. For ease of use, the most commonly used functions can be accessed with its user-friendly front panel design.

The SDS1000X-U series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. It comes with an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X U also employs a 256 level intensity grading display function and a color temperature display mode not found in other models in this class.

 










Link to new scope

https://siglentna.com/product/sds1104x-u/


Discuss!

Rather interesting offering... not sure what to think of it vs the E yet
Elasia:
After looking it over it seems more or less 100 bucks less for losing the accessory port.. which frankly the ones for it never excited me anyway

I suspect this very well could be enabled to 200 MHz but as its a board spin maybe not... wont be till someone gets one and gives it go that we will know

Edit.. on second thought they could have just depopd it and its just a bom rev
Fungus:

--- Quote from: Elasia on November 28, 2020, 07:11:09 pm ---After looking it over it seems more or less 100 bucks less for losing the accessory port.. which frankly the ones for it never excited me anyway

--- End quote ---

They cut a lot of other features, too. Reduced FFT size, reduced sample memory, less ADCs... and who knows what else?


--- Quote from: Elasia on November 28, 2020, 07:11:09 pm ---I suspect this very well could be enabled to 200 MHz but as its a board spin maybe not... wont be till someone gets one and gives it go that we will know

--- End quote ---

a) That's just a guess.
b) You really don't want want 200Mhz bandwidth on a 4-channel scope with 1Ghz sample rate. It breaks Nyquist.
tautech:

--- Quote from: Elasia on November 28, 2020, 07:11:09 pm ---After looking it over it seems more or less 100 bucks less for losing the accessory port.. which frankly the ones for it never excited me anyway

I suspect this very well could be enabled to 200 MHz but as its a board spin maybe not... wont be till someone gets one and gives it go that we will know

Edit.. on second thought they could have just depopd it and its just a bom rev

--- End quote ---
No, it needs be a new PCB as the signal path has changed to allow a single ADC to process all 4 channels.
Elasia:

--- Quote from: tautech on November 28, 2020, 07:50:57 pm ---
--- Quote from: Elasia on November 28, 2020, 07:11:09 pm ---After looking it over it seems more or less 100 bucks less for losing the accessory port.. which frankly the ones for it never excited me anyway

I suspect this very well could be enabled to 200 MHz but as its a board spin maybe not... wont be till someone gets one and gives it go that we will know

Edit.. on second thought they could have just depopd it and its just a bom rev

--- End quote ---
No, it needs be a new PCB as the signal path has changed to allow a single ADC to process all 4 channels.

--- End quote ---

Its a single now? Ouch.....  market fishing for higher profit margins? This seems like a lot of effort for a lot less product for not a lot less money..... no idea who would buy this and just throw their dollars away as far as single user or small groups go...  this thing is a flop for the hobbyist with the E version around and not much more
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod