Products > Test Equipment
Siglent .ads firmware file format
<< < (40/85) > >>
bluejedi:
If I remember correctly, the OS update was previously listed on the download page as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 05.22.18)

but is currently listed as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 06.26.18)



rf-loop:

--- Quote from: bluejedi on August 19, 2018, 01:43:56 pm ---If I remember correctly, the OS update was previously listed on the download page as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 05.22.18)

but is currently listed as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 06.26.18)

--- End quote ---

I have not checked how these older and more new files match but one I know. Instructions pdf is tiny bit edited. I have not compared all files but I have some "feel" they are equal.

But who use these when we have something "better" like SDS1004X-E_OSV1_EN_eevblog
tv84:
If you look inside, it seems they changed only the:

SDS1004X-E OS Revise History and Update Instructions.pdf
tv84:

--- Quote from: tautech on August 09, 2018, 02:09:07 am ---New firmware for SVA1015X
V2.1.1.1.12a
https://www.siglentamerica.com/download/6912/
38.8 MB

Changelog
2018/8/8
1. Spectrum Analysis mode:Improved the stability of sweep and interface.
2. VNA mode: fasten the VNA sweep speed; expand the minimum span from 10M to 10 kHz.
3. Modulation Analysis mode: add trigger, optimize the modulation analysis algorithm.
4. Add user port number selection for web server.

--- End quote ---

Product_ID 11401 (that was ripped from original FW) confirmed!!  ;D
radiolistener:

--- Quote from: PhilipPeake on July 17, 2018, 10:46:09 pm ---This may be common knowledge, but I was about to try fixing the root password for my SDS1102X running SDS1000X_V100R001B01D02P1510.ADS, and discovered that there is no telnet service running. Only Ports 111 and 9009.

So much for my idea of trying to upgrade the bandwidth - at least until there is enough progress here to decode and re-assemble the entire thing.

--- End quote ---

I investigated it here: https://www.eevblog.com/forum/testgear/siglent-sds1000x-how-to-make-direct-ethernet-connection/msg1650191/#msg1650191

The port 111 is getport, it is used to obtain VXI-11 protocol port and returns 9009 port.
The port 9009 is VXI-11 protocol port.

I implemented VXI-11 protocol in C#, so you can use it to send SCPI commands with no need to install NI VISA runtime.
The example in C# takes oscilloscope screenshot with SCPI command.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod