Products > Test Equipment

Siglent .ads firmware file format

<< < (40/85) > >>

bluejedi:
If I remember correctly, the OS update was previously listed on the download page as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 05.22.18)

but is currently listed as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 06.26.18)



rf-loop:

--- Quote from: bluejedi on August 19, 2018, 01:43:56 pm ---If I remember correctly, the OS update was previously listed on the download page as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 05.22.18)

but is currently listed as:

    SDS1004X-E Operating System -V1 (Only For 4-Channel ) (Release Date 06.26.18)

--- End quote ---

I have not checked how these older and more new files match but one I know. Instructions pdf is tiny bit edited. I have not compared all files but I have some "feel" they are equal.

But who use these when we have something "better" like SDS1004X-E_OSV1_EN_eevblog

tv84:
If you look inside, it seems they changed only the:

SDS1004X-E OS Revise History and Update Instructions.pdf

tv84:

--- Quote from: tautech on August 09, 2018, 02:09:07 am ---New firmware for SVA1015X
V2.1.1.1.12a
https://www.siglentamerica.com/download/6912/
38.8 MB

Changelog
2018/8/8
1. Spectrum Analysis mode:Improved the stability of sweep and interface.
2. VNA mode: fasten the VNA sweep speed; expand the minimum span from 10M to 10 kHz.
3. Modulation Analysis mode: add trigger, optimize the modulation analysis algorithm.
4. Add user port number selection for web server.

--- End quote ---

Product_ID 11401 (that was ripped from original FW) confirmed!!  ;D

radiolistener:

--- Quote from: PhilipPeake on July 17, 2018, 10:46:09 pm ---This may be common knowledge, but I was about to try fixing the root password for my SDS1102X running SDS1000X_V100R001B01D02P1510.ADS, and discovered that there is no telnet service running. Only Ports 111 and 9009.

So much for my idea of trying to upgrade the bandwidth - at least until there is enough progress here to decode and re-assemble the entire thing.

--- End quote ---

I investigated it here: https://www.eevblog.com/forum/testgear/siglent-sds1000x-how-to-make-direct-ethernet-connection/msg1650191/#msg1650191

The port 111 is getport, it is used to obtain VXI-11 protocol port and returns 9009 port.
The port 9009 is VXI-11 protocol port.

I implemented VXI-11 protocol in C#, so you can use it to send SCPI commands with no need to install NI VISA runtime.
The example in C# takes oscilloscope screenshot with SCPI command.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod