Products > Test Equipment
Siglent .ads firmware file format
alexitaly:
Hello everyone. Sorry for my english (I'm helping with the google translator).
First of all, nice to meet you, I'm Alessandro and it's the first time I write in this forum.
I have problems with my ATTEN ADS1102CAL oscilloscope. The revision of the motherboard is SAT7.820.681H. The memory is 40k.
Due to several bugs with trigger and time base I've installed the firmware of the SIGLENT SDS1102CNL oscilloscope:
version 5.01.02.13
file SDS1000CNL_SSP_V100R005B01D02P13
I also tried the last one (32).
Unfortunately, with the time base set from 100ms down to 1s and beyond, the update of the track on the time scale fails.
A friend lent me his SDS1102CML oscilloscope and there is no problem with that.
I would like to restore the original firmware ATTEN
file ADS1000CAL_V100R003B01D01P31R16
but the currently installed SIGLENT firmware does not let me do it: PRODUCT ID WRONG.
Could someone help me please?
Thank you.
tv84:
--- Quote from: alexitaly on April 22, 2020, 07:39:46 pm ---Could someone help me please?
--- End quote ---
That Atten FW is Product_ID: 80
Your Siglent FW is Product_ID: 79
I think I can do that for you but you're sailing in dangerous waters...
Edit: Go here.
alexitaly:
--- Quote ---That Atten FW is Product_ID: 80
Your Siglent FW is Product_ID: 79
I think I can do that for you but you're sailing in dangerous waters...
--- End quote ---
Very Very Thanks! :-+
Actually the scope is unusable with the timebase settings over 100ms...
The oscilloscope does not draw points at regular intervals on the time axis, it seems to add random delays... i think there is a bug in some pointer in my CNL firmware (or my hw is old for this FW) :'(
routerfan:
I have an atten 1102cal oscilloscope, hardware version: 3.41.1.16 software version: 3.01.01.21 SN: 30xxxx, then I refresh the firmware version number of siglent SDS 1102cnl: 5.01.02.13, everything looks normal. A few days later, I found the chip to upgrade the long memory( Is61lps5123a-200tqli), after welding it and brushing in 1102cml firmware, the failure occurred. After traversing all relevant discussions in this forum, I downloaded the binary file package to refresh the chip with the programmer, but the failure is still not solved. Now I have removed the chip. I think it's because of the compatibility between the firmware and the device. Thank you for your resources. But I still need to find the right firmware to save my oscilloscope. |O
routerfan:
I wrote this through translation software. I don't know if anyone can understand it :palm:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version