| Products > Test Equipment |
| Siglent .ads firmware file format |
| << < (74/85) > >> |
| tv84:
Gentlemen, let's continue this discussion in thread: https://www.eevblog.com/forum/repair/need-full-firmware-%28full-dump-flash%29-oscilloscope-atten-ads-1062cml/ It's more appropriated since here is completely OUT OF TOPIC. |
| gman76:
I have a couple Siglent SDS2104 scopes. I successfully pushed one from 1.0 to 2.0 awhile ago. It now has version 1.2.1.38.7 and tried to update to 1.2.2.2, whether R10 or R15. When I tried to update, I get a 'product type does not match' error. Maybe I have the latest fw. The website doesn't show any fw for base SDS2000 models, only SDS2000X or SDS2000X-E or SDS2000 Plus. Very confusing. The other 2104 scope has 1.1.1.37.2 and won't even show the "Press to Update" button on the screen. Can anyone help? |
| tv84:
--- Quote from: gman76 on June 18, 2020, 09:52:44 pm ---I have a couple Siglent SDS2104 scopes. I successfully pushed one from 1.0 to 2.0 awhile ago. It now has version 1.2.1.38.7 and tried to update to 1.2.2.2, whether R10 or R15. When I tried to update, I get a 'product type does not match' error. Maybe I have the latest fw. The website doesn't show any fw for base SDS2000 models, only SDS2000X or SDS2000X-E or SDS2000 Plus. Very confusing. The other 2104 scope has 1.1.1.37.2 and won't even show the "Press to Update" button on the screen. Can anyone help? --- End quote --- Have you tried sds2k_V100R02B01D02P0109_fvA1609220922M160922.ADS or sds2k_V100R02B01D02P02_fvA1609220922M160922.ADS? SDS2000x_1.2.2.2R10 and others are only for X versions! |
| tautech:
--- Quote from: gman76 on June 18, 2020, 09:52:44 pm ---I have a couple Siglent SDS2104 scopes. I successfully pushed one from 1.0 to 2.0 awhile ago. It now has version 1.2.1.38.7 and tried to update to 1.2.2.2, whether R10 or R15. When I tried to update, I get a 'product type does not match' error. Maybe I have the latest fw. The website doesn't show any fw for base SDS2000 models, only SDS2000X or SDS2000X-E or SDS2000 Plus. Very confusing. The other 2104 scope has 1.1.1.37.2 and won't even show the "Press to Update" button on the screen. Can anyone help? --- End quote --- Last FW version for SDS2000 models is V1.2.2.1R9 | Published:2016-11-23 You can get it here: http://www.siglentamerica.com/USA_website_2014/Firmware&Software/firmware/SDS2000-V1.2.2.1R9.rar Edit Many old firmware versions no longer available on the updated Siglent websites are still available here: http://old.siglentamerica.com/gjjrj.aspx?id=15&page=1 |
| Elasia:
--- Quote from: tautech on June 18, 2020, 10:13:29 pm ---Many old firmware versions no longer available on the updated Siglent websites are still available here: http://old.siglentamerica.com/gjjrj.aspx?id=15&page=1 --- End quote --- Interesting... that old site is a bonanza of information FAQ Oscilloscope Hardware Reset Solution: In some extreme hardware errors, the oscilloscope may become unresponsive or “hang” during the boot sequence. If your oscilloscope is frozen, will not boot, or appears to be unresponsive, you can attempt a hardware reset by following these instructions: 1. Disconnect all USB, LAN, and input cables. Leave the power cord connected. 2. Power cycle the instrument by pressing the power button. 3. Immediately begin pressing the MATH button repeatedly at a rate of 2 to 3 times a second while the instrument boots up. 4. If the instrument does not boot up properly, retry steps 2 through 4. NOTE: If you continue to have problems, contact your nearest SIGLENT office for service. |
| Navigation |
| Message Index |
| Next page |
| Previous page |