| Products > Test Equipment |
| Siglent General Wish List |
| << < (10/10) |
| Electro Fan:
The suggestion is to add a high performance paddle with an entry level paddle board (800HD) or at least with intermediate paddle boards (1kHD, 2kHD), we know Siglent can make really nice sailboats, powerboats, and probably yachts. :) |
| nanopico:
It would be nice for Siglent to provide users with a decent set of 50 ohm attenuators (3-6-10-20 dB). For entry-level oscilloscopes, such as SDS804X, the performance of the attenuators at 1 GHz is not important. Even for the 50 ohm feed through terminator, I have to use one from Rigol - ADP0150BNC :) Almost no distributor has the common BNC to BNC coaxial cable in stock. It seems that all users use Junkosha or, at least, Amphenol cables. If I have to wait a week or two for the distributor to send me a Siglent cable, I will definitely order elsewhere. |
| Electro Fan:
Back on the subject of the cost feasibility for adding 10 MHz Ref in to an oscilloscope.... Looks like not only does a Rigol DHO4000 provide 10 MHz Ref in and out, but even a 2 channel Rigol DHO1000 for about $699 (on sale for $599) provides 10 MHz Ref in and out (along with a 10.1'' 1280*800 HD display and HDMI). Before someone gets defensive, I see some good advantages with Siglent and I'd like to try a Siglent for my next scope but maybe a 10 MHz ref and maybe a tad more resolution and HDMI might be on the list of possible features in a 2000X HD "Plus"? (I'm not holding my breath given the X HD's are pretty new, but maybe someday sooner than a lot later.) |
| BillyO:
--- Quote from: Electro Fan on June 14, 2024, 11:44:10 pm ---Back on the subject of the cost feasibility for adding 10 MHz Ref in to an oscilloscope.... Looks like not only does a Rigol .. --- End quote --- One then has to be happy with what Rigol leave out to give you the 10 MHz reference. I don't want to start yet another scope war, but the first time I tried to use a Rigol it was like I hit a brick wall. The UI made no sense to me. The first time I used a Siglent it was like I had been using it for years. I really do want that 10 MHz reference input, but would not switch to a Rigol to get it. I still need to be able to use my scope. |
| Navigation |
| Message Index |
| Previous page |