| Products > Test Equipment |
| Siglent SDG2042X Firmware Update - Failed! |
| (1/2) > >> |
| Hrvoje_CRO:
Hi! I just wanted to update my SDG2042X with newest FW, but in every possible case i got error Failed! Please help! Thank you! Hrvoje |
| tautech:
--- Quote from: Hrvoje_CRO on May 23, 2023, 04:33:33 pm ---I just wanted to update my SDG2042X with newest FW, but in every possible case i got error Failed! --- End quote --- Using what process ? It should be by USB stick of which there are mandatory requirements, it must be in FAT32 format and best with 4k clusters and stick size should be 8GB or smaller. Further, if currently using an old firmware version there are dependencies of a version you must update to first before installing the latest. See attached update instructions and scroll down to the compatability table. |
| Hrvoje_CRO:
Hi tautech, "It should be by USB stick of which there are mandatory requirements, it must be in FAT32 format and best with 4k clusters and stick size should be 8GB or smaller." Yes, i know that and i am using 1GB stick. The problem is in that i stucked on FW update version 2.01.01.35RB2. After that i cannot update it to newer versions. Thank you in advance! |
| tautech:
--- Quote from: Hrvoje_CRO on May 24, 2023, 03:12:11 pm ---Hi tautech, "It should be by USB stick of which there are mandatory requirements, it must be in FAT32 format and best with 4k clusters and stick size should be 8GB or smaller." Yes, i know that and i am using 1GB stick. The problem is in that i stucked on FW update version 2.01.01.35RB2. After that i cannot update it to newer versions. Thank you in advance! --- End quote --- We have done 100's of updates over the years without issue so I highly suspect your USB stick is the problem. Replace it with a new 8GB one. |
| MathWizard:
I also have about a 3yo SDG2042X, and somehow "I hacked it" to the 2142X. I better upgrade this and my DMM also. I did upgrade my scope, it was pretty easy. |
| Navigation |
| Message Index |
| Next page |