Products > Test Equipment

Siglent SDG6000X series 200-500 MHz AWG's

<< < (78/104) > >>

strahd_von_zarovich:
Hi everyone,
Is there anyone who face with the problem of not being able to enable DHCP? Here is the video:

baldurn:
It is likely trying to get a DHCP lease. That seems to fail within a timeout so it disables again.

Detlev:
Hello everyone,

I think I found a bug in firmware 6.01.01.36R3 on the SDG6022X:

I have the SDG and the frequency counter FCA3000 both attached to the Leo Bodnar GPSDO. With the previous version of the firmware, the SDG6022 was synchronized to the GPSDO after switching on.

With the current firmware, however, the internal clock is active after switching on, although the SDG shows the external clock as selected in the setup. This is only noticeable if you also check the frequency with the frequency counter.

Can other SDG owners also confirm this?

Many greetings
Detlev

oz2cpu:
did anyone make their own 2D (stereo) files, and then upload to the SDG6022X
lt is very easy to do when it is a normal single channel file, But
lets say we want to make grafix on a scope in XY mode, but like to manually plot our own lines,
that is why we need to undersand how to make a 2ch file.

berke:

--- Quote from: oz2cpu on January 01, 2023, 03:34:03 pm ---did anyone make their own 2D (stereo) files, and then upload to the SDG6022X
lt is very easy to do when it is a normal single channel file, But
lets say we want to make grafix on a scope in XY mode, but like to manually plot our own lines,

--- End quote ---
No and I'd like to know.  The manual doesn't say anything, and I don't feel like running some weird Windows executable on my machine.
However you can generate separate channels for the CSV's and it works pretty well.

(No Z-axis?  No problem.)

91 MSa/s, TrueArb

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod