Products > Test Equipment

Siglent SDG6000X series 200-500 MHz AWG's

<< < (85/104) > >>

Detlev:

--- Quote from: tv84 on April 13, 2023, 10:41:27 am ---Almost too good to be true!

--- End quote ---

The structure consists only of the Siglent SDG6022X, the Rohde & Schwarz FPL1000 and the Sucotest cable.

There's not much that can go wrong    :)

mawyatt:
It seems these SDG6000X AWGs are pretty good as shown in images #29 and #30.

Same goes for the little brother SDG2000X AWG as shown in #31 screen image.

Results are from a SSA3021X Plus, certainly not in the same class as the R&S FLP1000, but still respectable.

Edit: Added Image #32 which is for the SDG2000X AWG at 10MHz.

Best,

Detlev:

--- Quote from: mawyatt on April 13, 2023, 04:16:10 pm ---It seems these SDG6000X AWGs are pretty good as shown in images #29 and #30.

Same goes for the little brother SDG2000X AWG as shown in #31 screen image.

Results are from a SSA3021X Plus, certainly not in the same class as the R&S FLP1000, but still respectable.

Edit: Added Image #32 which is for the SDG2000X AWG at 10MHz.

Best,

--- End quote ---

Thanks for your measurements. You confirm the simulation and also my measurements.

Siglent did a good job there.

Your measurements are also interesting for me because they give me a comparison between the FPL1000 and the SSA3021X. I also shortlisted the SSA3021X. In the end, it ended up being the FPL1000, which gave me many sleepless nights  ;)  :D   I don't always spend so much money on a measuring device  ;)

tautech:

--- Quote from: Detlev on April 13, 2023, 06:13:36 pm ---
--- Quote from: mawyatt on April 13, 2023, 04:16:10 pm ---It seems these SDG6000X AWGs are pretty good as shown in images #29 and #30.

Same goes for the little brother SDG2000X AWG as shown in #31 screen image.

Results are from a SSA3021X Plus, certainly not in the same class as the R&S FLP1000, but still respectable.

Edit: Added Image #32 which is for the SDG2000X AWG at 10MHz.

Best,

--- End quote ---

Thanks for your measurements. You confirm the simulation and also my measurements.

Siglent did a good job there.

Your measurements are also interesting for me because they give me a comparison between the FPL1000 and the SSA3021X. I also shortlisted the SSA3021X. In the end, it ended up being the FPL1000, which gave me many sleepless nights  ;)  :D   I don't always spend so much money on a measuring device  ;)

--- End quote ---
Please ensure you select the Plus version.....more features, later improved UI and touch screen and mouse support for just a few $ more.

tautech:
Customer wanted to see the performance boundaries of SDG6022X in Pulse mode.....things get hard to nicely capture at mV levels with noise mucking with the frequency counter.....it's @ 80 MHz like the 1V p-p pulse shows.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod