Products > Test Equipment

Siglent SDG6000X series 200-500 MHz AWG's

<< < (97/104) > >>

nctnico:
Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

2N3055:

--- Quote from: nctnico on May 16, 2024, 07:25:25 pm ---Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

--- End quote ---
There is no spike. Simple as that.

nctnico:

--- Quote from: 2N3055 on May 16, 2024, 08:34:20 pm ---
--- Quote from: nctnico on May 16, 2024, 07:25:25 pm ---Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

--- End quote ---
There is no spike. Simple as that.

--- End quote ---
The scope screenshot doesn't show that information so if you have no useful information to add, it is better to wait for Tautech to acknowledge he enabled peak-detect in order to do this kind of measurement correctly or to redo the measurement with peak-detect enabled and show a new screenshot.

2N3055:

--- Quote from: nctnico on May 16, 2024, 08:51:36 pm ---
--- Quote from: 2N3055 on May 16, 2024, 08:34:20 pm ---
--- Quote from: nctnico on May 16, 2024, 07:25:25 pm ---Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

--- End quote ---
There is no spike. Simple as that.

--- End quote ---
The scope screenshot doesn't show that information so if you have no useful information to add, it is better to wait for Tautech to acknowledge he enabled peak-detect in order to do this kind of measurement correctly or to redo the measurement with peak-detect enabled and show a new screenshot.

--- End quote ---

You just have to be condescending aren't you?

I MEASURED. There is no spike. With Peak detect, without, with different scopes.
I have that AWG for 3+ years...
I would not post that if I didn't have veritable information and was sure...
Haven't you learn that by now?

Njk:
It's a trivial case that every dealer can show. But the fact that it is able to keep the zero offset does not prove that it is also able to preserve a user-defined DC offset (i.e. the logic levels). While the latter is obviously of more importance

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod