Products > Test Equipment

Siglent SDG6000X series 200-500 MHz AWG's

<< < (98/104) > >>

tautech:

--- Quote from: nctnico on May 16, 2024, 08:51:36 pm ---
--- Quote from: 2N3055 on May 16, 2024, 08:34:20 pm ---
--- Quote from: nctnico on May 16, 2024, 07:25:25 pm ---Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

--- End quote ---
There is no spike. Simple as that.

--- End quote ---
The scope screenshot doesn't show that information so if you have no useful information to add, it is better to wait for Tautech to acknowledge he enabled peak-detect in order to do this kind of measurement correctly or to redo the measurement with peak-detect enabled and show a new screenshot.

--- End quote ---
:-//
Not my screenshot above.

However I might have done it a little different using a Normal Trigger waiting for the signal to return after power ON.
But not today, too much to arrange for EMEX the week after next.....

nctnico:

--- Quote from: 2N3055 on May 16, 2024, 09:11:38 pm ---
--- Quote from: nctnico on May 16, 2024, 08:51:36 pm ---
--- Quote from: 2N3055 on May 16, 2024, 08:34:20 pm ---
--- Quote from: nctnico on May 16, 2024, 07:25:25 pm ---Was this measured with peak-detect enabled? At 4Ms/s it is easy to lose a spike.

--- End quote ---
There is no spike. Simple as that.

--- End quote ---
The scope screenshot doesn't show that information so if you have no useful information to add, it is better to wait for Tautech to acknowledge he enabled peak-detect in order to do this kind of measurement correctly or to redo the measurement with peak-detect enabled and show a new screenshot.

--- End quote ---

You just have to be condescending aren't you?

I MEASURED. There is no spike. With Peak detect, without, with different scopes.

--- End quote ---
Well, you should have written that to make your point clear to everyone. That is useful information.

Bad_Driver:
I‘m going to change my SDS 2000 against a 6000.
Some questions to the experts:
The liberation process is still the same as described in Message 241?
And the ADS file also works for the last firmware?
The public key gen doesn‘t work for the 6000 series?
Thanks for your help!

Edit:
Sorry: SDG6000 (Maybe I have to much Siglent gear on my bench) 

Martin72:
I would be interested in that too, for the same reason. ;)

electr_peter:

--- Quote from: Bad_Driver on October 22, 2024, 06:33:56 am ---I‘m going to change my SDS 2000 against a 6000.

--- End quote ---
Are you interested in SDS (scope) or SDG (wave gen)? Main topic was on SDG.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod