Products > Test Equipment
Siglent SDL1000X/SDL1000X-E Electronic Load
did:
Hi,
RMA number already received yesterday from the seller :D
I will send back the unit after Christmas holiday period. During the while I will try to find out the trigger of this misbehavior. Will start the SDL1020X-E in different temperature conditions in the coming days. May be I will find the suitable way to reproduce this issue and then ease the diagnosis.
Bad_Driver:
My load suffers from the same issue.
First boot: the same failure and the fan is running at full speed.
Second boot: everything is ok.
Unfortunately my device is now 26 month old, 2 month older than the European warranty period, so I have to apply for the 3 year-warranty from Siglent.
Has anyone the commands by the hand to reconvert my SDL1020x-E backward to the original state?
Thanks in advance!
Mortymore:
For an SDL1020X-E hacked to an SDL1030X, the process can be reverted using Ni-Max (with LAN connection, or USB)
SDL1030X -> SDL1020X-E
SYSTem:DEVICE:PRODUCTUG:ID 2
300W -> 200W
SYSTem:DEVICE:POWERUG 200
Rename LOAD (if it was changed)
SYSTem:DEVICE:PRODUCTUG SDL1020X-E
Model IDs:
1 - SDL1020X (4 digits)
2 - SDL1020X-E (3 digits)
4 - SDL1030X (4 digits)
5 - SDL1030X-E (3 digits)
Veteran68:
If you use a LAN connection you don't need NI software, all you need is a telnet client and connect to port 5025
--- Code: ---┌──(david@tux1)-[~]
└─$ telnet sdl1020x-e 5025
Trying 192.168.0.232...
Connected to sdl1020x-e.XXXXXX.com.
Escape character is '^]'.
*IDN?
Siglent Technologies,SDL1030X,SDL13GXXXXXXXX,1.1.1.22R1
^]
telnet> quit
Connection closed.
┌──(david@tux1)-[~]
└─$
--- End code ---
You can use PuTTY on Windows (or any other terminal app that supports telnet)
pmendiuk:
I have a SDL-1020X-E that previously was very reliable, then intermittently does not apply any load. The unit is out of warranty and I wondered if anyone have a schematic or service manual?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version