Products > Test Equipment
Siglent SDM3045X - Enough is enough
Ringmodulator:
How would be the steps to revert from a hacked 3055X-E back to the 3045X?
Chris
tv84:
--- Quote from: Ringmodulator on January 13, 2022, 02:06:45 pm ---How would be the steps to revert from a hacked 3055X-E back to the 3045X?
--- End quote ---
I have to make the reverse patch...
Ringmodulator:
--- Quote from: tv84 on January 13, 2022, 03:45:45 pm ---
--- Quote from: Ringmodulator on January 13, 2022, 02:06:45 pm ---How would be the steps to revert from a hacked 3055X-E back to the 3045X?
--- End quote ---
I have to make the reverse patch...
--- End quote ---
Maybe, my question was not clear enough.
If I hack my 3045X to the 3055X-E with the modified 3055X-E firmware and for some reason want to revert to the 3045X, what are the steps?
Is it sufficient to simply install the normal (unmodified) 3045X firmware update?
Chris
tv84:
--- Quote from: Ringmodulator on January 13, 2022, 05:35:21 pm ---Maybe, my question was not clear enough.
--- End quote ---
Your question was clear, my answer seems not.
You can only flash a 3045X FW again if I change its ProdID previously. If not, the machine will reject the FW package.
Kleinstein:
If the hacked 3055 FW has the 3045 ID to run on the 3045, it could well work with just a normal firmware update to the original 3045. We don't know the details and thus the rather good question on how to get possibly back, just in case (e.g. if you want to sell the meter).
It may work with the original FW, or it may need a slightly patched one.
Another similar question is, if there is a future SDM3055 FW update, how to apply this to the hacked meter ?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version