Products > Test Equipment

Siglent SDM3045X - Enough is enough

<< < (13/21) > >>

tautech:

--- Quote from: et328 on January 14, 2022, 06:35:39 am ---
--- Quote from: tautech on January 14, 2022, 06:24:29 am ---That's what some browsers do.  >:(
Go back to the int.siglent.com page and select the Chinese website from the globe pop down in the top right corner.
The current 3055X-E firmware is linked a page or 2 back in this thread and it downloads to your browsers download folder.

--- End quote ---
Still doesn't work properly i.e. switch to Chinese. Your direct link for the firmware file does work. I have tried Edge, Chrome, Firefox all have the same issue.
--- End quote ---
Works fine with Chrome here so must be browser settings redirecting you......a reason why I never let them auto translate but instead manually translate anything I can't read.
The Chinese Siglent website used to be notorious for redirecting you to an English version however none of them show the juicy new products that are coming our way.  :)


--- Quote ---But after some trying I noticed if I use the url below, I can get directly to the Chinese site and can browse there to the SDM3055X-E page and from there to the firmware page.
https://www.siglent.com/?l=1
--- End quote ---
:-+

n3mmr:

--- Quote from: tv84 on January 13, 2022, 09:49:30 pm ---If it is "hacked" you can only install 3055X-E FW as tautech said.

Edit: Here is the reversing instruction.

--- End quote ---

Thank you!

Can you give a one-liner explanation of what the patch does?
Could it be that it describes a set of criteria for its suitability?

tautech:

--- Quote from: n3mmr on January 14, 2022, 09:02:08 am ---
--- Quote from: tv84 on January 13, 2022, 09:49:30 pm ---If it is "hacked" you can only install 3055X-E FW as tautech said.

Edit: Here is the reversing instruction.

--- End quote ---

Thank you!

Can you give a one-liner explanation of what the patch does?
Could it be that it describes a set of criteria for its suitability?

--- End quote ---
Yes, the FW version must match the HW and the OS checks if the FW version is the correct one. The patch fools the OS to believe the FW version is correct so it then goes on to load it.

et328:
What about product id in the system info page? It still shows 3045. Were the .xml files uploaded here not the correct ones for tv84 to make a patch for it?

Pinkus:

--- Quote from: et328 on January 14, 2022, 09:39:57 am ---What about product id in the system info page? It still shows 3045. Were the .xml files uploaded here not the correct ones for tv84 to make a patch for it?

--- End quote ---
My XML files are probably useless, as if you open them, you will see no information about the model number, thus it has to be stored somewhere else.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod