Products > Test Equipment

Siglent SDM3045X - Enough is enough

<< < (16/21) > >>

Ringmodulator:

--- Quote from: pcmihnea on January 17, 2022, 08:53:17 am ---

Ok, thanks.
Tried the attached FW file, but any flashing attempts results in 'update failed'... Are there any special steps to be taken for flashing - especially since the unit may see it as a version downgrade?

--- End quote ---

Just ignore the errormessage and dont reboot.
Simply telnet the unit at the specified port.
It helps to have notet the IP of the unit first. ;)

After reboot, the unit is back to its normal state.
There is nothing really installed by this ADS file.

Chris

pcmihnea:

--- Quote from: Ringmodulator on January 17, 2022, 12:30:48 pm ---
--- Quote from: pcmihnea on January 17, 2022, 08:53:17 am ---

Ok, thanks.
Tried the attached FW file, but any flashing attempts results in 'update failed'... Are there any special steps to be taken for flashing - especially since the unit may see it as a version downgrade?

--- End quote ---

Just ignore the errormessage and dont reboot.
Simply telnet the unit at the specified port.
It helps to have notet the IP of the unit first. ;)

After reboot, the unit is back to its normal state.
There is nothing really installed by this ADS file.

Chris

--- End quote ---

Ah, now that's a clever hack! :)

As I've now have backups of my calibration files, I've succesfully flashed the SDM3055X-E patched FW, and it seems to still be in spec with a calibrated voltage source (0.01% on DC voltage), so it still has (at least) that measurement calibrated - I don't have any other precise references to test...
As noted by previous posters, the device shows as SDM3045X. Also, new features added to the 3045X are not (yet) present on the 3055X-E FW, most notably the custom temperature sensor (and I assume the bugfixes, as well :) ).

Ringmodulator:

--- Quote from: pcmihnea on January 17, 2022, 08:53:17 am ---
Ah, now that's a clever hack! :)

As I've now have backups of my calibration files, I've succesfully flashed the SDM3055X-E patched FW, and it seems to still be in spec with a calibrated voltage source (0.01% on DC voltage), so it still has (at least) that measurement calibrated - I don't have any other precise references to test...
As noted by previous posters, the device shows as SDM3045X. Also, new features added to the 3045X are not (yet) present on the 3055X-E FW, most notably the custom temperature sensor (and I assume the bugfixes, as well :) ).

--- End quote ---

I am still curious, if the suggested "reverse hack" from tv84 really works. Afaik, he does not have the unit himself:

https://www.eevblog.com/forum/testgear/siglent-sdm3045x-enough-is-enough/msg3938767/#msg3938767

If you would try this, I would be interested in the result.

The device name is defined in NSP_trends_config_info.xml

Chris

n3mmr:

--- Quote from: Ringmodulator on January 17, 2022, 03:34:45 pm ---
--- Quote from: pcmihnea on January 17, 2022, 08:53:17 am ---
Ah, now that's a clever hack! :)

As I've now have backups of my calibration files, I've succesfully flashed the SDM3055X-E patched FW, and it seems to still be in spec with a calibrated voltage source (0.01% on DC voltage), so it still has (at least) that measurement calibrated - I don't have any other precise references to test...
As noted by previous posters, the device shows as SDM3045X. Also, new features added to the 3045X are not (yet) present on the 3055X-E FW, most notably the custom temperature sensor (and I assume the bugfixes, as well :) ).

--- End quote ---

I am still curious, if the suggested "reverse hack" from tv84 really works. Afaik, he does not have the unit himself:

https://www.eevblog.com/forum/testgear/siglent-sdm3045x-enough-is-enough/msg3938767/#msg3938767

If you would try this, I would be interested in the result.

The device name is defined in NSP_trends_config_info.xml

Chris

--- End quote ---
If you're asking about getting back to being an SDM3045X, yes. It works, as does the hack to make the SDM3045X be an SDM3055X-W.

tv84:

--- Quote from: Ringmodulator on January 17, 2022, 03:34:45 pm ---Afaik, he does not have the unit himself:

--- End quote ---

As the other 99% devices I talk about...  :-DD

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod