Products > Test Equipment
siglent SDM3045x locking up, does anyone else have this happen? (not boot issue)
<< < (3/3)
thom:
haha you are right, I was completely misremembering that. it's been months since I dealt with this issue, and for some reason I remember having to toggle the switch on the back, but obviously there isn't one, so the soft button must be working since I didn't unplug it this last time.

anyhow, I don't know what you suggest, the guy before me sounds like he has the same problem I've had with all 3 of my units, and I'll remind you that I spoke with a siglent engineer who verified that my first unit was defective
tautech:

--- Quote from: thom on January 16, 2023, 07:33:59 pm ---anyhow, I don't know what you suggest, the guy before me sounds like he has the same problem I've had with all 3 of my units, and I'll remind you that I spoke with a siglent engineer who verified that my first unit was defective

--- End quote ---
Garbage.
MarkKn clearly stated he didn't get to the bottom of why his froze.

Yours OTOH is quite different if your pissing with a LAN cable was reliably making it momentarily freeze.
Why would you do that it it don't like it ?
Wouldn't getting a cheap LAN switch be a less stressful solution ?
thom:
> Garbage.
MarkKn clearly stated he didn't get to the bottom of why his froze.

I mean his symptoms are the same as mine, ie. interface freezing requiring a reboot.


I don't think you understand what is going on here, I have a cat5e cable that is split into two banana jacks, so that I can use this as an easy probe instead of shoving normal probes inside an RJ45 jack awkwardly. it does the exact same thing with a normal set of probes measuring anything else as well, this has absolutely nothing to do with the fact that I am using a cat5 cable as a probe, in fact I am only using this specific setup because I am using this meter as a secondary meter now; previous to getting the keithly, the 3045 was my primary meter and did the same thing with normal probes.

hell man, I could literally remove everythign but the power cord and it will still lock up.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod