Products > Test Equipment

siglent SDM3045x locking up, does anyone else have this happen? (not boot issue)

<< < (3/3)

thom:
haha you are right, I was completely misremembering that. it's been months since I dealt with this issue, and for some reason I remember having to toggle the switch on the back, but obviously there isn't one, so the soft button must be working since I didn't unplug it this last time.

anyhow, I don't know what you suggest, the guy before me sounds like he has the same problem I've had with all 3 of my units, and I'll remind you that I spoke with a siglent engineer who verified that my first unit was defective

tautech:

--- Quote from: thom on January 16, 2023, 07:33:59 pm ---anyhow, I don't know what you suggest, the guy before me sounds like he has the same problem I've had with all 3 of my units, and I'll remind you that I spoke with a siglent engineer who verified that my first unit was defective

--- End quote ---
Garbage.
MarkKn clearly stated he didn't get to the bottom of why his froze.

Yours OTOH is quite different if your pissing with a LAN cable was reliably making it momentarily freeze.
Why would you do that it it don't like it ?
Wouldn't getting a cheap LAN switch be a less stressful solution ?

thom:
> Garbage.
MarkKn clearly stated he didn't get to the bottom of why his froze.

I mean his symptoms are the same as mine, ie. interface freezing requiring a reboot.


I don't think you understand what is going on here, I have a cat5e cable that is split into two banana jacks, so that I can use this as an easy probe instead of shoving normal probes inside an RJ45 jack awkwardly. it does the exact same thing with a normal set of probes measuring anything else as well, this has absolutely nothing to do with the fact that I am using a cat5 cable as a probe, in fact I am only using this specific setup because I am using this meter as a secondary meter now; previous to getting the keithly, the 3045 was my primary meter and did the same thing with normal probes.

hell man, I could literally remove everythign but the power cord and it will still lock up.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod