Products > Test Equipment
Siglent SDM3065X
(1/8) > >>
eurofox:
Hi guy's,

I would like to buy a 6 1/2 digit multimeter with trending capability without breaking the bank  :-DMM

Of course there is Keysight, Keithley, PeakTech and Siglent....maybe some other.  :=\

When I look the the datasheet the Siglent SDM3065X seems to be a winner when I look to the price/performance.

Service from Siglent is maybe not yet on the level of Keysight.

Thank you for sharing your experience if you have such a multimeter.  :scared:
tautech:
Thread about all the SDM3k models:
https://www.eevblog.com/forum/testgear/siglent-new-bench-dmm-sdm3055/

I've got one with the 16ch logging card if there's anything you want me to check for you.
I sold another one to member Defpom and he uses it for his repairs on his YouTube channel....easy to find him if you look.
eurofox:

--- Quote from: tautech on May 26, 2018, 08:18:36 am ---Thread about all the SDM3k models:
https://www.eevblog.com/forum/testgear/siglent-new-bench-dmm-sdm3055/

I've got one with the 16ch logging card if there's anything you want me to check for you.
I sold another one to member Defpom and he uses it for his repairs on his YouTube channel....easy to find him if you look.

--- End quote ---

I check already the Defpom 2hour video but it does not show any test about accuracy, is more relate to use the the multimeter.

Nobody connect it to a calibrator ar compare to a Keysight 34465A?
tautech:

--- Quote from: eurofox on May 26, 2018, 08:27:34 am ---
--- Quote from: tautech on May 26, 2018, 08:18:36 am ---Thread about all the SDM3k models:
https://www.eevblog.com/forum/testgear/siglent-new-bench-dmm-sdm3055/

I've got one with the 16ch logging card if there's anything you want me to check for you.
I sold another one to member Defpom and he uses it for his repairs on his YouTube channel....easy to find him if you look.

--- End quote ---

I check already the Defpom 2hour video but it does not show any test about accuracy, is more relate to use the the multimeter.

Nobody connect it to a calibrator ar compare to a Keysight 34465A?

--- End quote ---
You only need compare the datasheets, on my one the Cal cert specifies it was calibrated with a Fluke 5522A which was 3 months inside its Cal period so should ensure the specified datasheet accuracy. There's also a specified 1 year accuracy listed.

Member kj7e had one but I think he updated it for 7.5 digits or more.
He had a rough start with his and got another one from Siglent USA.
His first impressions are here:
https://www.eevblog.com/forum/testgear/siglent-new-bench-dmm-sdm3055/msg824341/#msg824341
nctnico:
The cal sheet doesn't really guarantee anything. Peope doing tests with calibrators and way better instruments found some accuracy related bugs in the Keysight 3446xA series DMMs for example (which got fixed by a firmware update after Keysight reproduced it).
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod