Products > Test Equipment
Siglent SDS 1202X-E - Firmware Update
<< < (9/10) > >>
AleXis6:

--- Quote from: Performa01 on June 22, 2023, 03:37:05 pm ---so your scope is well within spec.

--- End quote ---
Thank you for the detailed answer, I bought this oscilloscope in spring and only now was  able to look at it thoroughly in different modes, at the same time to see those microvolts, which in reality are unlikely to be of use to me
DL9HAM:
FW 1.3.27 SDS1202X-E Serial decode kaputt!
I cannot decode serial data with 1.3.27! backdated 1.3.26 works. Can somebody confirm this please?

Setting is UART, 1200 baud 8n1 idle Hi, LSB...
1.3.26 decodes all text, 1.3.27 decodes nothing apart from the occasional wrongly decoded character...

Or am I just too stupid to get this going?

Michael
tautech:

--- Quote from: DL9HAM on December 29, 2023, 09:33:58 am ---FW 1.3.27 SDS1202X-E Serial decode kaputt!
I cannot decode serial data with 1.3.27! backdated 1.3.26 works. Can somebody confirm this please?

Setting is UART, 1200 baud 8n1 idle Hi, LSB...
1.3.26 decodes all text, 1.3.27 decodes nothing apart from the occasional wrongly decoded character...

Or am I just too stupid to get this going?

Michael

--- End quote ---
Welcome to the forum.

Do ensure decode thresholds are set correctly.
DL9HAM:
Hi, thanks for the quick response,

but I think, I did set the threshold correctly, because I get it working everytime in 1.3.26 but never in 1.3.27.

Do you get it to decode serial, uart in 1.3.27? What is the difference in settings btwn 26 and 27 FW?
AVGresponding:

--- Quote from: DL9HAM on December 29, 2023, 10:47:29 am ---Hi, thanks for the quick response,

but I think, I did set the threshold correctly, because I get it working everytime in 1.3.26 but never in 1.3.27.

Do you get it to decode serial, uart in 1.3.27? What is the difference in settings btwn 26 and 27 FW?

--- End quote ---

Have a read of this thread, it may be useful: https://www.eevblog.com/forum/testgear/siglent-1202x-e-serial-decoding-not-working/
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod