Products > Test Equipment

Siglent SDS1000X HD 12bit DSO's

<< < (37/96) > >>

tautech:

--- Quote from: BillyO on October 18, 2023, 07:37:29 pm ---It's taking them a while.  I wonder why they are taking so long?

--- End quote ---
There have been changes since the original design.

Careful study of the OP hints of them.  ;)

Antonio90:
2gs/s? Isn't that directly competing against the 2000X HD?

So, it's going to be a 2000X HD alternative without MSO or AWG and slightly lower cost then?
It will probably be an excellent scope, but my guess is 1800€ starting price, out of general hobbyist range.

Edit: and lower bandwith front-end.

tautech:

--- Quote from: Antonio90 on October 18, 2023, 08:09:07 pm ---2gs/s? Isn't that directly competing against the 2000X HD?
--- End quote ---
No.
2000X HD is a 500 MHz design whereas 1000X HD is a 200 MHz design.
Study the datasheets.  ;)


--- Quote ---So, it's going to be a 2000X HD alternative without MSO or AWG and slightly lower cost then?
--- End quote ---
MSO and AWG will be external HW options of which this HW already exists for other models.
Not including this HW in the design will help reduce pricing.

Martin72:

--- Quote ---2gs/s? Isn't that directly competing against the 2000X HD?
--- End quote ---

Not really..
My guess is it will have one ADC for all channels because of the samplerate dropping to 500MSa/s when all channel are active.
Then the already mentioned max. bandwith of 200Mhz and the 100Mpts memory, dropping to 25Mpts when all channel are active.
And then there is the possibility that, the data sheet is silent about the fact, that average and eres are available as math functions like in the 2000Xplus and are not implemented on the hardware side like in the 2000X HD.
There are already a few differences present... ;)


Antonio90:

--- Quote from: tautech on October 18, 2023, 08:14:57 pm ---
--- Quote from: Antonio90 on October 18, 2023, 08:09:07 pm ---2gs/s? Isn't that directly competing against the 2000X HD?
--- End quote ---
No.
2000X HD is a 500 MHz design whereas 1000X HD is a 200 MHz design.
Study the datasheets.  ;)


--- Quote ---So, it's going to be a 2000X HD alternative without MSO or AWG and slightly lower cost then?
--- End quote ---
MSO and AWG will be external HW options of which this HW already exists for other models.
Not including this HW in the design will help reduce pricing.

--- End quote ---
Yeah, I spotted my mistake right after hitting "post". 200 VS 500MHz is a big difference.
Let's wait and see. I think leaving the LA and AWG as addons is a good move, and quite a few siglent users have external AWGs already for FRA.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod