Products > Test Equipment
Siglent SDS1000X HD 12bit DSO's
BillyO:
They better hurry. I have the money now but it's burning a hole in my pocket, and I have the attention span of an addled gnat.
Hope they offer some other color than black/charcoal grey. It will throw my whole lab aesthetic off! :palm: :scared: :-DD
Martin72:
There has never been a black model on the western market and that's all I'm going to say about that. :-X ;)
tautech:
--- Quote from: skander36 on November 03, 2023, 10:09:31 am ---
--- Quote from: tautech on November 03, 2023, 01:05:25 am ---Playing with Zoom mode which offers both horizontal and vertical zoom.
--- End quote ---
Touch&zoom(not pinch&zoom) or from buttons (or both)?
--- End quote ---
Zoom is activated pressing the timebase control.
--- Quote ---By touch zoom I mean draw a rectangle and touch for zoom in.
--- End quote ---
The size of the zoom window box is set with horizontal and vertical controls and the zoom window box can be moved with touch and we can also position where the waveform in the box in both the unzoomed or zoomed window with touch.
Default zoom is only horizontal until we select the zoomed window and increase sensitivity.
ebastler:
--- Quote from: tautech on October 26, 2023, 10:42:54 pm ---
--- Quote from: tautech on October 19, 2023, 09:50:09 am ---Digital mode.
Pre-release scope HW and SW ! SW enhancements requested since last beta FW release.
Currently available SLA1016 LA module with latest FW.
Just half of the 16 channels available displayed. Each channel can be individually toggled ON or OFF or as a group of 8.
--- End quote ---
Needed to check something now we have a later version FW....
And now we have trace color tabs that match with the LA pod flying leads.....something slowly migrating to all models as resources allow.
--- End quote ---
Hi Rob, I have read up a bit on the capabilities and limitations of the external LA option. Best I could find was a rather old summary by Performa01, relating to the SDS1000X-E: https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/msg2007983/#msg2007983
Are the limitations the same for the 1000X HD?
(a) No mixed digital/analog pattern trigger -- this is probably a fundamental limitation of the external LA?
(b) No Zoom in Run mode with the digital channels -- this seems like a software limitation that has hopefully been overcome, maybe even for the 1000X-E in the meantime?
Thanks!
tautech:
--- Quote from: ebastler on November 04, 2023, 07:47:27 am ---
--- Quote from: tautech on October 26, 2023, 10:42:54 pm ---
--- Quote from: tautech on October 19, 2023, 09:50:09 am ---Digital mode.
Pre-release scope HW and SW ! SW enhancements requested since last beta FW release.
Currently available SLA1016 LA module with latest FW.
Just half of the 16 channels available displayed. Each channel can be individually toggled ON or OFF or as a group of 8.
--- End quote ---
Needed to check something now we have a later version FW....
And now we have trace color tabs that match with the LA pod flying leads.....something slowly migrating to all models as resources allow.
--- End quote ---
Hi Rob, I have read up a bit on the capabilities and limitations of the external LA option. Best I could find was a rather old summary by Performa01, relating to the SDS1000X-E: https://www.eevblog.com/forum/testgear/siglent-sds1204x-e-released-for-domestic-markets-in-china/msg2007983/#msg2007983
--- End quote ---
Well I suspect things have changed some since 2018 where IIRC there have been 2 or more FW updates to the external SLA1016 LA module
--- Quote ---Are the limitations the same for the 1000X HD?
(a) No mixed digital/analog pattern trigger -- this is probably a fundamental limitation of the external LA?
--- End quote ---
Unsure, this need be checked as to where the triggering is actually happening where I would suspect inside the scope.
--- Quote ---(b) No Zoom in Run mode with the digital channels -- this seems like a software limitation that has hopefully been overcome, maybe even for the 1000X-E in the meantime?
--- End quote ---
Why would we need a zoom mode for digital channels when they are a reconstruction of a pulse that meets a user set threshold. What we see on the display bears little resemblance to the digital waveform.
Much like a clock waveform, it matters little what it looks like providing it meets the required thresholds.
Lemme think about running some tests in the next few days....although it's the weekend I do have a bit on.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version