| Products > Test Equipment |
| Siglent SDS1000X HD 12bit DSO's |
| << < (70/96) > >> |
| ebastler:
Thank you both. Yes, the SDS2104X plus is on my "shortlist", and is leading the pack there. (The SDS1000X HD and Rigol's MSO5074 and DHO914S are the other contenders.) Unfortunately it is the most expensive one on the list too -- ah well, I guess market pricing kind of works... |
| Warhawk:
ebastler, I am not sure if this helps but I was in the same situation two weeks ago. I decided for the SDS2000X+. The fact that LeCroy sells it with their logo gives me confidence that it is not bad. I originally thought that I would wait for SDS1000X but the logic analyzer limitations changed my mind. I did not want to make compromises on that. I too considered the DHO914S because of the bode plot but it is too small for my eyesight. Additionally, there are standard #justrigolthings . The 800 series is financially attractive but 1Mpts/ch is too low. tl;dr; I have SDS2104x+ on my desk und ich bin ein sehr zufriedener Bastler. . :-+ I am going for the hack and want to make the logic analyzer pod myself using the old HP cable. I have extras. One can be yours. |
| KungFuJosh:
--- Quote from: Warhawk on November 05, 2023, 01:24:47 pm ---I am going for the hack and want to make the logic analyzer pod myself using the old HP cable. I have extras. One can be yours. --- End quote --- Alternatively, there is a low cost DIY version of the probe here as well: https://www.eevblog.com/forum/testgear/diy-logic-analyzer-probe-and-pods-for-siglent-scopes/ I had the mediocre version of that from fleabay, and it worked fine for all the batronix demo board stuff. I wound up having the correct boards made, and I'll eventually make the better version true to the project. |
| Warhawk:
--- Quote from: KungFuJosh on November 05, 2023, 03:48:21 pm --- --- Quote from: Warhawk on November 05, 2023, 01:24:47 pm ---I am going for the hack and want to make the logic analyzer pod myself using the old HP cable. I have extras. One can be yours. --- End quote --- Alternatively, there is a low cost DIY version of the probe here as well: https://www.eevblog.com/forum/testgear/diy-logic-analyzer-probe-and-pods-for-siglent-scopes/ I had the mediocre version of that from fleabay, and it worked fine for all the batronix demo board stuff. I wound up having the correct boards made, and I'll eventually make the better version true to the project. --- End quote --- I am aware of the thread. Thank you. This is the place where I somewhere found the version for the HP logic cables. |
| ebastler:
Many thanks, Warhawk and KungFuJosh! Regarding the LA probe, Siglent are currently enticing new buyers of the SDS2000X plus with that bundle offer... Being "legal" on pretty much all options (except for higher bandwidth) and getting the very nice LA probe is tempting. I would prefer if they had a special offer on the price of the base unit instead -- but from a marketing perspective I can see that they don't want to let that price degrade if they can avoid it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |