Products > Test Equipment
Siglent SDS1000X HD 12bit DSO's
2N3055:
--- Quote from: MathWizard on May 18, 2023, 05:30:41 am ---So I have a hacked SDS1204X-E, and overall I love it. And for an upgrade I'd be looking at the SDS2104Xplus w/hack to 350MHz iirc. Maybe this summer, or next year, but there's no rush, it's just a luxury. But the way prices are going, maybe the sooner the better.
The SDS2104X HD is way too expensive for my hobby use. So how will these SDS1000X HD compare to the 2104Xplus ? Will they have the FFT mode ?
--- End quote ---
There is a datasheet somewhere here...
In short, it will have same FFT as 2000X HD.
Also same 4 math ch,... So 4x2Mpts FFT at the same time.
It will have power analysis package too. Also front end voltage offset ranges from SDSD2000X HD that are better than most scopes out there regardless of the price...
In general biggest difference is only one shared 1GS/s ADC and single shared 100MPts memory for all channels and digital channels and AWG are external.
Compared to SDS2000X Plus ? If you are working a lot on pure analog stuff at low frequencies (power supplies for instance) SDS1000X HD is going to do better. For mixed signal and stuff that need higher BW and longer memory SDS2000X Plus will be better..
Tool for the job.
Truth is, if final released price will be good, you could have both ... >:D :-DD
2N3055:
--- Quote from: ojete on May 18, 2023, 06:07:44 am ---Can you connect a usb wifi adapter like the tp link of the SDS1104X-E to get wifi or is it just wired lan?
--- End quote ---
Wired... No official WiFi...
But with 500uV/div sensitivity and low noise front end would you really want to add WiFi ??
In my lab, there is no WiFi in a room, and phones are taken out when I measure something seriously...
It might be convenient (and sometimes not a problem), but is not best option for high sensitivity measuring device.
tautech:
--- Quote from: 2N3055 on May 18, 2023, 06:54:30 am ---
--- Quote from: ojete on May 18, 2023, 06:07:44 am ---Can you connect a usb wifi adapter like the tp link of the SDS1104X-E to get wifi or is it just wired lan?
--- End quote ---
Wired... No official WiFi...
But with 500uV/div sensitivity and low noise front end would you really want to add WiFi ??
In my lab, there is no WiFi in a room, and phones are taken out when I measure something seriously...
It might be convenient (and sometimes not a problem), but is not best option for high sensitivity measuring device.
--- End quote ---
Yet we have no reports of any excessive noise when using WiFi and the 4ch SDS1000X-E......a 200 MHz design has to do darn well to display 2.4 GHz signals.....
2N3055:
--- Quote from: tautech on May 18, 2023, 07:28:09 am ---
--- Quote from: 2N3055 on May 18, 2023, 06:54:30 am ---
--- Quote from: ojete on May 18, 2023, 06:07:44 am ---Can you connect a usb wifi adapter like the tp link of the SDS1104X-E to get wifi or is it just wired lan?
--- End quote ---
Wired... No official WiFi...
But with 500uV/div sensitivity and low noise front end would you really want to add WiFi ??
In my lab, there is no WiFi in a room, and phones are taken out when I measure something seriously...
It might be convenient (and sometimes not a problem), but is not best option for high sensitivity measuring device.
--- End quote ---
Yet we have no reports of any excessive noise when using WiFi and the 4ch SDS1000X-E......a 200 MHz design has to do darn well to display 2.4 GHz signals.....
--- End quote ---
It won't display 2.4GHz signal but demodulation artifacts... Similar to chirping you hear in computer speakers close to the phone...
dophuc:
Sorry but I'm curious what measurements make you worried about interference by wifi ? :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version