Products > Test Equipment

SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests

<< < (3/13) > >>

sameerdhiman:

--- Quote from: tautech on December 03, 2019, 06:31:17 pm ---
--- Quote from: azdem on December 03, 2019, 05:05:33 pm ---@Siglent

I want to update the firmware of my SDS1072CML (HW Version: 11-62-3.7, bought in ~2015, Current FW Version: 5.01.02.29, never updated). None of the ADS files listed on https://www.siglent.eu/Downloads work: I get always this message:  "Product type does not match".

--- End quote ---
Welcome to the forum.

It is because the CML range was updated to the CML+ and now none of the official Siglent websites have the older CML model firmware. DO NOT attempt to install CML+ FW versions into older CML models.
In my records I have one later CML firmware version, P32 from Nov 15.

Summary of Changes:
1.added bandwidth update option
2.fixed some bugs (including trigger jitter problem. If use LongMemory and if timebase is 250us/div or less there is a jitter. If change to Normal memory no problem, if switch to Long Memory it appears.)

The .ads file is not large, only 1.5 MB so I can post it here or send it to you privately in an email.
PM your email and I can send it to you.

--- End quote ---

Can you please share that file on google drive or any location from where I can download the same.

Regards,
Sameer

tautech:
SDS1000CML (NOT for later CML+ models !)
July 2015 Version: 5.01.02.32

Files attached.
Note, REMOVE .txt extension from P32.ADS firmware file.

sameerdhiman:

--- Quote from: tautech on April 14, 2020, 12:19:19 pm ---SDS1000CML (NOT for later CML+ models !)
July 2015 Version: 5.01.02.32
http://siglentamerica.com/download/software/SDS1000CML_SSP_V100R005B01D02P32.rar

--- End quote ---

It says "Download does not exist"

Dear I want to confirm things before updating the firmware whether the product supports it or not. I purchased the re-branded DSO in Aug-2013 (INDIA) Metravi DSO-5070A 70MHz 2-Channel it came with Siglent User Manual and it's details are here under
Software Version: 5.01.02.13
Hardware Version: 11-62-3.3
Serial No. NEUxxxxxxxxxxx
Product Type: DSO-5070A

1. Can we identify from above details whether product is CML/CFL/CNL ?
2. Do we need to install all firmware updates released so far in incremental order or the last released update includes all the patches from previous firmwares ?

I very much require your help here. If you require me to open the case to identify correctly I can do that also if above details are not sufficient.

Regards,
Sameer Dhiman

tautech:
Edit made to previous post.

sameerdhiman:
Thank you so much.  :-+

Please, how can I identify that the DSO I own is SDS1072CML ? from Hardware Version etc. ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod