| Products > Test Equipment |
| SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests |
| << < (4/13) > >> |
| tautech:
--- Quote from: sameerdhiman on April 14, 2020, 02:50:00 pm ---Thank you so much. :-+ Please, how can I identify that the DSO I own is SDS1072CML ? from Hardware Version etc. ? --- End quote --- You will probably need to install a cfg file first to allow for the Siglent firmware to then be recognised and installed. You can find that cfg file here: https://www.eevblog.com/forum/testgear/siglent-ads-firmware-file-format/msg2998250/#msg2998250 |
| sameerdhiman:
--- Quote from: tautech on April 14, 2020, 03:13:09 pm --- --- Quote from: sameerdhiman on April 14, 2020, 02:50:00 pm ---Thank you so much. :-+ Please, how can I identify that the DSO I own is SDS1072CML ? from Hardware Version etc. ? --- End quote --- You will probably need to install a cfg file first to allow for the Siglent firmware to then be recognised and installed. You can find that cfg file here: https://www.eevblog.com/forum/testgear/siglent-ads-firmware-file-format/msg2998250/#msg2998250 --- End quote --- Is there any risk involved in installing CFG file ? I am asking this because I do not have any other DSO this is the only oscilloscope I have. Regards, Sameer Dhiman |
| tautech:
--- Quote from: sameerdhiman on April 15, 2020, 10:15:07 am --- --- Quote from: tautech on April 14, 2020, 03:13:09 pm --- --- Quote from: sameerdhiman on April 14, 2020, 02:50:00 pm ---Thank you so much. :-+ Please, how can I identify that the DSO I own is SDS1072CML ? from Hardware Version etc. ? --- End quote --- You will probably need to install a cfg file first to allow for the Siglent firmware to then be recognised and installed. You can find that cfg file here: https://www.eevblog.com/forum/testgear/siglent-ads-firmware-file-format/msg2998250/#msg2998250 --- End quote --- Is there any risk involved in installing CFG file ? --- End quote --- No. It is necessary to install the firmware so DSO is changed from Metravi to Siglent and will accept the FW upgrade. Looking at your model specs here: https://www.metravi.com/single-product.php?prod=DSO-5070E&cat=Digital+Storage+Oscilloscope It aligns to SDS1072CML: https://www.batronix.com/shop/oscilloscopes/Siglent-SDS1072CML.html Except the USB socket placement is different. :-// There is always a risk flashing another firmware into a DSO and only you can decide to take that risk. IMO, with the USB socket in a different place it seems the HW is different so I would not attempt to make the firmware change until more information comes available. YMMV |
| sameerdhiman:
--- Quote from: tautech on April 15, 2020, 08:19:48 pm --- No. It is necessary to install the firmware so DSO is changed from Metravi to Siglent and will accept the FW upgrade. Looking at your model specs here: https://www.metravi.com/single-product.php?prod=DSO-5070E&cat=Digital+Storage+Oscilloscope It aligns to SDS1072CML: https://www.batronix.com/shop/oscilloscopes/Siglent-SDS1072CML.html Except the USB socket placement is different. :-// There is always a risk flashing another firmware into a DSO and only you can decide to take that risk. IMO, with the USB socket in a different place it seems the HW is different so I would not attempt to make the firmware change until more information comes available. YMMV --- End quote --- The model you looked at (DSO-5070E) is newer model and it is different from mine (DSO-5070A). They have removed DSO-5070A related material from their website but I dug out the web and I found the relevant document on another website. Please go through the attached document, I am 99% sure that 5070A is SDS1072CML now only 1% is left on your confirmation. BTW, had Siglent released any update between P13 and P22 for CML ? Regards, Sameer Dhiman |
| tv84:
--- Quote from: sameerdhiman on April 15, 2020, 08:47:05 pm ---BTW, had Siglent released any update between P13 and P22 for CML ? --- End quote --- For that model, I think not. But in the end, despite your "similarity" feeling it should be a decision of your own. You can't expect tautech to certify a crossflash of that kind because no one has done it before. That doesn't mean it wont work. There is always a 1st attempt. |
| Navigation |
| Message Index |
| Next page |
| Previous page |