| Products > Test Equipment |
| SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests |
| << < (5/13) > >> |
| tautech:
--- Quote from: sameerdhiman on April 15, 2020, 08:47:05 pm --- --- Quote from: tautech on April 15, 2020, 08:19:48 pm --- No. It is necessary to install the firmware so DSO is changed from Metravi to Siglent and will accept the FW upgrade. Looking at your model specs here: https://www.metravi.com/single-product.php?prod=DSO-5070E&cat=Digital+Storage+Oscilloscope It aligns to SDS1072CML: https://www.batronix.com/shop/oscilloscopes/Siglent-SDS1072CML.html Except the USB socket placement is different. :-// There is always a risk flashing another firmware into a DSO and only you can decide to take that risk. IMO, with the USB socket in a different place it seems the HW is different so I would not attempt to make the firmware change until more information comes available. YMMV --- End quote --- The model you looked at (DSO-5070E) is newer model and it is different from mine (DSO-5070A). They have removed DSO-5070A related material from their website but I dug out the web and I found the relevant document on another website. Please go through the attached document, I am 99% sure that 5070A is SDS1072CML now only 1% is left on your confirmation. --- End quote --- Ah, OK --- Quote ---BTW, had Siglent released any update between P13 and P22 for CML ? --- End quote --- At a quick look through old files, apparently not but I maybe wrong. Later 29 and 32 versions were released. --- Quote from: tv84 on April 15, 2020, 08:53:30 pm --- --- Quote from: sameerdhiman on April 15, 2020, 08:47:05 pm ---BTW, had Siglent released any update between P13 and P22 for CML ? --- End quote --- For that model, I think not. But in the end, despite your "similarity" feeling it should be a decision of your own. You can't expect tautech to certify a crossflash of that kind because no one has done it before. That doesn't mean it wont work. There is always a 1st attempt. --- End quote --- :-+ |
| tv84:
My suggestion is: open the case and look at the PCB references. That should provide the necessary infos. |
| sameerdhiman:
OK I'll do it and will update you. Thank you so much Tautech and tv84 :-+ Regards, Sameer Dhiman |
| sameerdhiman:
This is to let you know that update process is successfully completed on Metravi DSO-5070A. Special thanks goes to tautech and thanks tv84 for encouraging me. :-+ :clap: 150700 and 150734 => Before update 151151 and 151238 => After Config update (Boot picture and Device Type changed to OEM Siglent) 152926, 153603 and 153826 => After P22, P29 and P32 updates. Regards, Sameer Dhiman |
| tv84:
--- Quote from: sameerdhiman on April 16, 2020, 11:50:40 am ---This is to let you know that update process is successfully completed on Metravi DSO-5070A. --- End quote --- Well done! :clap: Fortune favors the bold. Now get me this SCPI command response: MD5_PR? |
| Navigation |
| Message Index |
| Next page |
| Previous page |