Products > Test Equipment
SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests
tautech:
--- Quote from: sameerdhiman on April 15, 2020, 08:47:05 pm ---
--- Quote from: tautech on April 15, 2020, 08:19:48 pm ---
No.
It is necessary to install the firmware so DSO is changed from Metravi to Siglent and will accept the FW upgrade.
Looking at your model specs here:
https://www.metravi.com/single-product.php?prod=DSO-5070E&cat=Digital+Storage+Oscilloscope
It aligns to SDS1072CML:
https://www.batronix.com/shop/oscilloscopes/Siglent-SDS1072CML.html
Except the USB socket placement is different. :-//
There is always a risk flashing another firmware into a DSO and only you can decide to take that risk.
IMO, with the USB socket in a different place it seems the HW is different so I would not attempt to make the firmware change until more information comes available.
YMMV
--- End quote ---
The model you looked at (DSO-5070E) is newer model and it is different from mine (DSO-5070A). They have removed DSO-5070A related material from their website but I dug out the web and I found the relevant document on another website. Please go through the attached document, I am 99% sure that 5070A is SDS1072CML now only 1% is left on your confirmation.
--- End quote ---
Ah, OK
--- Quote ---BTW, had Siglent released any update between P13 and P22 for CML ?
--- End quote ---
At a quick look through old files, apparently not but I maybe wrong.
Later 29 and 32 versions were released.
--- Quote from: tv84 on April 15, 2020, 08:53:30 pm ---
--- Quote from: sameerdhiman on April 15, 2020, 08:47:05 pm ---BTW, had Siglent released any update between P13 and P22 for CML ?
--- End quote ---
For that model, I think not.
But in the end, despite your "similarity" feeling it should be a decision of your own. You can't expect tautech to certify a crossflash of that kind because no one has done it before.
That doesn't mean it wont work. There is always a 1st attempt.
--- End quote ---
:-+
tv84:
My suggestion is: open the case and look at the PCB references. That should provide the necessary infos.
sameerdhiman:
OK I'll do it and will update you.
Thank you so much Tautech and tv84 :-+
Regards,
Sameer Dhiman
sameerdhiman:
This is to let you know that update process is successfully completed on Metravi DSO-5070A.
Special thanks goes to tautech and thanks tv84 for encouraging me. :-+ :clap:
150700 and 150734 => Before update
151151 and 151238 => After Config update (Boot picture and Device Type changed to OEM Siglent)
152926, 153603 and 153826 => After P22, P29 and P32 updates.
Regards,
Sameer Dhiman
tv84:
--- Quote from: sameerdhiman on April 16, 2020, 11:50:40 am ---This is to let you know that update process is successfully completed on Metravi DSO-5070A.
--- End quote ---
Well done! :clap:
Fortune favors the bold.
Now get me this SCPI command response:
MD5_PR?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version