| Products > Test Equipment |
| SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests |
| << < (6/13) > >> |
| sameerdhiman:
--- Quote from: tv84 on April 16, 2020, 01:16:16 pm --- Well done! :clap: Fortune favors the bold. Now get me this SCPI command response: MD5_PR? --- End quote --- It is not connected to PC. I use it as standalone unit. |
| tv84:
--- Quote from: sameerdhiman on April 16, 2020, 02:56:37 pm ---It is not connected to PC. I use it as standalone unit. --- End quote --- Can you connect it? Maybe an upgrade is possible... |
| tautech:
--- Quote from: sameerdhiman on April 16, 2020, 02:56:37 pm --- --- Quote from: tv84 on April 16, 2020, 01:16:16 pm --- Well done! :clap: Fortune favors the bold. Now get me this SCPI command response: MD5_PR? --- End quote --- It is not connected to PC. I use it as standalone unit. --- End quote --- Follow tv84's lead as it may well benefit you. ;) You should have a USB-B connection on the back of the scope for connection to a PC. You will need to download and install EasyScopeX from a Siglent website. You also need NIVISA Runtime for the USB connectivity SW. Install the Runtime package before EasyScopeX. Within EasyScopeX there is a SCPI command panel where you can enter and execute commands. To check it's working properly *IDN? returns the instruments information. Have fun. |
| sameerdhiman:
Of course, Let me setup NI-VISA, IVI and EasyScope. Fortunately, I have my own detailed post on this forum regarding setting up NI-VISA. https://www.eevblog.com/forum/testgear/siglent-sds1102cml-scope-and-easyscopex/msg285583/#msg285583 |
| sameerdhiman:
--- Quote from: tv84 on April 16, 2020, 01:16:16 pm --- Now get me this SCPI command response: MD5_PR? --- End quote --- These are the response *IDN? => *IDN SIGLENT,SDS1072CML,NEUxxxxxxxxxxx,5.01.02.32 MD5_PR? => SDS1000CML |
| Navigation |
| Message Index |
| Next page |
| Previous page |