Products > Test Equipment
SIGLENT SDS1072CML (v5.01.02.22) next firmware feature requests
sameerdhiman:
--- Quote from: tv84 on April 16, 2020, 01:16:16 pm ---
Well done! :clap:
Fortune favors the bold.
Now get me this SCPI command response:
MD5_PR?
--- End quote ---
It is not connected to PC. I use it as standalone unit.
tv84:
--- Quote from: sameerdhiman on April 16, 2020, 02:56:37 pm ---It is not connected to PC. I use it as standalone unit.
--- End quote ---
Can you connect it? Maybe an upgrade is possible...
tautech:
--- Quote from: sameerdhiman on April 16, 2020, 02:56:37 pm ---
--- Quote from: tv84 on April 16, 2020, 01:16:16 pm ---
Well done! :clap:
Fortune favors the bold.
Now get me this SCPI command response:
MD5_PR?
--- End quote ---
It is not connected to PC. I use it as standalone unit.
--- End quote ---
Follow tv84's lead as it may well benefit you. ;)
You should have a USB-B connection on the back of the scope for connection to a PC.
You will need to download and install EasyScopeX from a Siglent website. You also need NIVISA Runtime for the USB connectivity SW. Install the Runtime package before EasyScopeX.
Within EasyScopeX there is a SCPI command panel where you can enter and execute commands.
To check it's working properly *IDN? returns the instruments information.
Have fun.
sameerdhiman:
Of course, Let me setup NI-VISA, IVI and EasyScope.
Fortunately, I have my own detailed post on this forum regarding setting up NI-VISA.
https://www.eevblog.com/forum/testgear/siglent-sds1102cml-scope-and-easyscopex/msg285583/#msg285583
sameerdhiman:
--- Quote from: tv84 on April 16, 2020, 01:16:16 pm ---
Now get me this SCPI command response:
MD5_PR?
--- End quote ---
These are the response
*IDN? => *IDN SIGLENT,SDS1072CML,NEUxxxxxxxxxxx,5.01.02.32
MD5_PR? => SDS1000CML
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version