Products > Test Equipment
SIGLENT SDS1102CML oscilloscope problem
Rick:
Somebody from this forum mentioned on youtube that he had problems with a Rigol DS1052E due to saturated input amplifiers.
My Siglent SDS1102CML has the same kind of problem.
Although the video quality is poor I think it is quite clear.
mswhin63:
Where are you taking the reference from?
Rick:
--- Quote from: mswhin63 on May 18, 2013, 01:36:57 am ---Where are you taking the reference from?
--- End quote ---
From the scope itself. It's the square wave of the scope.
mswhin63:
It could be the reference itself, try another reference if you can
Rick:
--- Quote from: mswhin63 on May 19, 2013, 03:20:02 am ---It could be the reference itself, try another reference if you can
--- End quote ---
You may be right. Thank you.
I have just tried to use another square wave, I couldn't see the same problem with that signal.
Still, there is a problem with the reference.
Navigation
[0] Message Index
[#] Next page
Go to full version