Author Topic: Siglent SDS1102CML+ stuck on boot screen?  (Read 1782 times)

0 Members and 1 Guest are viewing this topic.

Offline bugeyedTopic starter

  • Newbie
  • Posts: 1
  • Country: us
Siglent SDS1102CML+ stuck on boot screen?
« on: September 15, 2021, 01:43:57 am »
My SDS1102CML+ O-scope was purchased March 6, 2018.I used it twice & packed it away. Today I set up my new bench & found that the O-scope is stuck at the boot screen. I tried the Power-On press Math button repeatedly without success. I have read that there may be a USB recovery operation that is available. Can someone shed some light on this?
Regards,
Kev
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 29813
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #1 on: September 15, 2021, 02:01:39 am »
Welcome to the forum.

PM sent.
Avid Rabid Hobbyist.
Some stuff seen @ Siglent HQ cannot be shared.
 
The following users thanked this post: bugeyed

Offline p4linnovation

  • Newbie
  • Posts: 2
  • Country: us
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #2 on: February 11, 2022, 01:42:40 am »
My SDS1102CML+ O-scope was purchased March 6, 2018.I used it twice & packed it away. Today I set up my new bench & found that the O-scope is stuck at the boot screen. I tried the Power-On press Math button repeatedly without success. I have read that there may be a USB recovery operation that is available. Can someone shed some light on this?
Regards,
Kev

I am having the same issue with my 1052DL+.  Did you ever find a fix for it?
 

Offline dorkoti

  • Newbie
  • Posts: 1
  • Country: fr
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #3 on: October 23, 2024, 08:37:32 am »
Hello, I just got the Siglent SDS1102CML+ but same problem, it is stuck on the bootscreen. I tried to hit the math button but it didn't help.
SO i wondered if @tautech could help with the mehtod to recover from this issue.
 TYA.
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 29813
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #4 on: October 23, 2024, 09:40:31 am »
Hello, I just got the Siglent SDS1102CML+ but same problem, it is stuck on the bootscreen. I tried to hit the math button but it didn't help.
SO i wondered if @tautech could help with the mehtod to recover from this issue.
 TYA.
Welcome to the forum.

Siglent EU HQ have the tools to help you.
info-eu@siglent.com
Avid Rabid Hobbyist.
Some stuff seen @ Siglent HQ cannot be shared.
 

Offline grvitya

  • Newbie
  • Posts: 1
  • Country: ie
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #5 on: October 24, 2024, 08:15:08 pm »
My  Siglent SDS1102CML+  have same problem, it is stuck on the bootscreen. Trick with Math button doesn't work.
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 29813
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #6 on: October 24, 2024, 10:05:26 pm »
My  Siglent SDS1102CML+  have same problem, it is stuck on the bootscreen. Trick with Math button doesn't work.
Welcome to the forum.

As above, contact German EU HQ and they will provide the recovery package.
Avid Rabid Hobbyist.
Some stuff seen @ Siglent HQ cannot be shared.
 

Offline w5egm

  • Newbie
  • Posts: 1
  • Country: us
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #7 on: November 16, 2024, 02:11:03 am »
Hello everyone!!
I have a Siglent SDS1102CML+ that was pruchased in April of 2021 and hasn't been heavily used. It got bbricked  after turn it on 36 times, sent back to Siglent USA for repairs, and got bricked again a week after I got it back...
Is there any way to get it back in business without send it to Siglent USA???
Thanks in advance
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 29813
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SDS1102CML+ stuck on boot screen?
« Reply #8 on: November 16, 2024, 03:53:53 am »
Hello everyone!!
I have a Siglent SDS1102CML+ that was purchased in April of 2021 and hasn't been heavily used. It got bbricked  after turn it on 36 times, sent back to Siglent USA for repairs, and got bricked again a week after I got it back...
Is there any way to get it back in business without send it to Siglent USA???
Thanks in advance
Welcome the forum.

A couple of ways...
1. The good ol' Math button bashed repeatably at boot < try several times.
If no success, GOTO #2

2. PM me with the SN# and your email address.
Avid Rabid Hobbyist.
Some stuff seen @ Siglent HQ cannot be shared.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf