| Products > Test Equipment |
| SIGLENT SDS1102X-C, supported languages issue |
| << < (8/15) > >> |
| Othman:
last update. i have updated my scope to newest FW 1.3.26 version. and every think it is ok. i would to thank everybody who was generous and patient advising and helping me especially tv84 who did the important work for reconfiguration the scope. thank you guys i really appreciate your efforts. and i'm pleased to help any body who might would face the same situation |
| rf-loop:
--- Quote from: Othman on August 27, 2022, 09:41:16 am ---last update. i have updated my scope to newest FW 1.3.26 version. and every think it is ok. i would to thank everybody who was generous and patient advising and helping me especially tv84 who did the important work for reconfiguration the scope. thank you guys i really appreciate your efforts. and i'm pleased to help any body who might would face the same situation --- End quote --- One note. Still (afaik) it is not same as SDS1202X-E You can check it easy. Generate example 40000 pulse single burst. Set Burst frequency to 400kHz (pulse period 2.5us) and pulse width (example) 200ns. Set oscilloscope: 1 channel on. 50ns/div. Trig rising edge. Mode Sequence and set trig so that it capture only single sequence. Set segments in sequence exactly 40000. Start single sequence. After then start pulse generator so that it generate this 40000 pulses burst only. After it have done, look if oscilloscope have captured every pulse. You can after this see this pulse on screen and also you can see in history there is exactly 40000 pulses. If not, it is not SDS1202X-E and not ewven SDS1102X-E. It is still SDS1x02X-C but with languages. But if there is in history now 40000 segments then it is as SDS1202X-E (SDS1202X-E can do even bit faster in real.. bit over 490000 segment/s with this said setup) Also normal view (not sequence) wfm speed is afaik less than with SDS1202X-E hardware. If Oscilloscope single Sequence never come ready with this settings... you can just interrupt is and go to History and look how many segments it have get... and in data table you see how fast it have been... look time stamps. Siglent have also told C models are half speed (propably less brute force inside). Naturally this is not meaningful at all for many users. Also there is other methods to check is it SDS1202X-E or still X-C but this is simple and "bullet proof". HW is not changed! Also Siglent warranty is valid only in China and as defined there so if meet any problems... These are "web shop only" models. As example here https://item.jd.com/10022992281441.html#crumb-wrap 1614 CNY. Naturally this is not meaningful at all for many users. |
| Othman:
--- Quote from: rf-loop on August 27, 2022, 11:54:56 am ---One note. Still (afaik) it is not same as SDS1202X-E --- End quote --- you might be right. this model may is different. however this thread is not about claiming that we have managed to configure the model X-C to be exactly like X-E model. instead of that the main aim for this thread is activating the english language option so this model can support english in UI as the model X-E do. i have got in this trouble because i had to buy siglent scope from china without awaring about the language i assumed that it would be like the X-E model with less capability and returning it back was not an option for my area where i live. |
| rf-loop:
--- Quote from: Othman on August 27, 2022, 02:42:48 pm --- --- Quote from: rf-loop on August 27, 2022, 11:54:56 am ---One note. Still (afaik) it is not same as SDS1202X-E --- End quote --- you might be right. this model may is different. however this thread is not about claiming that we have managed to configure the model X-C to be exactly like X-E model. instead of that the main aim for this thread is activating the english language option so this model can support english in UI as the model X-E do. --- End quote --- Yes, of course. It was very nice you get english language after this you have told and specially because return was not possible solution...: "i have got in this trouble because i had to buy siglent scope from china without awaring about the language" For you this was "Happy End" :) ...and perhaps you get even bit better what you have thinked (we do not know now freq BW real change) My comment was just note for some unknown readers that they do not think that SDS1102X-C model can easy convert to real SDS1202X-E. As you may know here is many kind of readers. |
| tv84:
That was also the reason why I left both .CFG files in my previous post. Anyone can choose between X-C and X-E designations, both with all languages possible. Is there a specific X-C firmware release? If there is, maybe the right thing would be to reflash the X-C firmware, now that we have the .CFG "corrected". And, as rf-loop hints, you could try measure the max BW/performance the device can get. Because, one thing is certain, the 1202X-C designation is in the original .CFG file so this may indicate (for me, at least) that 200MHz is attainable. |
| Navigation |
| Message Index |
| Next page |
| Previous page |