Products > Test Equipment
SIGLENT SDS1102X-C, supported languages issue
<< < (12/15) > >>
Othman:
dear alexkg have you managed to transform your scope? may i can ask you to share here the Acquisition mode menu of your scope, this is a submenu of the acquire menu. i think my scope miss the High Resolution option, can you confirm that with your scope!
tautech:

--- Quote from: Othman on January 12, 2023, 09:05:38 am ---dear alexkg have you managed to transform your scope? may i can ask you to share here the Acquisition mode menu of your scope, this is a submenu of the acquire menu. i think my scope miss the High Resolution option, can you confirm that with your scope!

--- End quote ---
Correct.
To be equivalent to SDS1202X-E it needs the ERES menu.
rf-loop:

--- Quote from: tautech on January 12, 2023, 10:39:34 am ---
--- Quote from: Othman on January 12, 2023, 09:05:38 am ---dear alexkg have you managed to transform your scope? may i can ask you to share here the Acquisition mode menu of your scope, this is a submenu of the acquire menu. i think my scope miss the High Resolution option, can you confirm that with your scope!

--- End quote ---
Correct.
To be equivalent to SDS1202X-E it needs the ERES menu.

--- End quote ---

Yeah.
The SDS1202X-C is not the Chinese version of the SDS1202X-E, not at all even it looks outside like it.
It's a bit different. It is also an "web shops only" model series and only for the Chinese domestic market. That model is also clearly slower than the X-E series what is also told in data sheet. Well, when you stretch a penny, you get a stretched penny.

Same for all these models:
SDS1104X-C 100 MHz
SDS1204X-C 200MHz
SDS1102X-C 100 MHz
SDS1202X-C 200MHz
alexkg:

--- Quote from: Othman on January 12, 2023, 09:05:38 am ---dear alexkg have you managed to transform your scope? may i can ask you to share here the Acquisition mode menu of your scope, this is a submenu of the acquire menu. i think my scope miss the High Resolution option, can you confirm that with your scope!

--- End quote ---

Unfortunately, I don’t have the opportunity to deal with this device now, most of the time there is no electricity, it appears for a couple of hours.  There is a war going on in my country.  As soon as the results appear, I will share them.
alexkg:

--- Quote from: rf-loop on January 12, 2023, 11:12:22 am ---
--- Quote from: tautech on January 12, 2023, 10:39:34 am ---
--- Quote from: Othman on January 12, 2023, 09:05:38 am ---dear alexkg have you managed to transform your scope? may i can ask you to share here the Acquisition mode menu of your scope, this is a submenu of the acquire menu. i think my scope miss the High Resolution option, can you confirm that with your scope!

--- End quote ---
Correct.
To be equivalent to SDS1202X-E it needs the ERES menu.

--- End quote ---

Yeah.
The SDS1202X-C is not the Chinese version of the SDS1202X-E, not at all even it looks outside like it.
It's a bit different. It is also an "web shops only" model series and only for the Chinese domestic market. That model is also clearly slower than the X-E series what is also told in data sheet. Well, when you stretch a penny, you get a stretched penny.

Same for all these models:
SDS1104X-C 100 MHz
SDS1204X-C 200MHz
SDS1102X-C 100 MHz
SDS1202X-C 200MHz

--- End quote ---

I want to ask you to bring this data here, the difference in technical characteristics.  Unfortunately, I did not find a difference in technical characteristics between the X-E and X-C versions.  Externally, the devices are one to one, the difference is only in the name of the models :) we will be grateful if you share the information that you found, where it is said that the model for the domestic market is slower than the one that is exported.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod