Products > Test Equipment

Siglent SDS1104X-E and SDS1204X-E: Bode plot with a non-Siglent AWG

<< < (14/35) > >>

vfxsoup:
To the OP, this works with the FY6900 just fine* using the FY6600 code.

*I had to hack the second channel to turn on alongside channel 1 on the FY6900 (in fy6600.py), as the SDS1104X-E needs a direct connection from the AWG along side the output from the DUT as a reference, otherwise the Bode plot is just a mess of spurious data points. For some reason the scope wasn't requesting channel 2 to switch on, so I just told it to enable channel 2 as per channel 1 and everything worked fine (all other settings are sent to channel 2 of the FY6900).

Thanks for writing this code!

nichrist:
Hi
I am considering buying the SDX1204 and I would like to known if it would be possible to use it in conjunction with a Rigol AWG DG1062 which I already have, for drawing Bode plots.

Thank you in advance

TechieTX:
I have a FY2300 coming on a slow boat from China (is it a coincidence it's called a Junk?)  ;D

I'm going to mod the FY2300 board to put switched 5V on the USB connector, and hook it to an ESP8266 D1 Mini clone board.  I'll let ya know how it goes, masterx81.  From the earlier comment by ptype, it's likely to work.  I have the programming manual for the 2300 and also for the 6600/6800/6900.  They look the same, but there may be a couple of gotchas I can fix.

Roman oh:
I've been reading through this thread with interest (thank you everyone who has contributed!), having recently bought a new 1104X-E (and made it into a 1204X-E with all options - thanks also to those people!) and having ordered an FY6900.
So I have a simple question, the answer to which is clearly inferable from this thread, but not stated anywhere I can see - which suggests there may be something I am missing.
It appears from this thread that communication between the CRO and the FY6900 is via WiFi. My Siglent manual clearly states that the AWG connects via USB, and doesn't suggest any options.
What am I missing?  Where does the magic happen?

rf-loop:

--- Quote from: Roman oh on March 25, 2021, 12:02:00 am ---I've been reading through this thread with interest (thank you everyone who has contributed!), having recently bought a new 1104X-E (and made it into a 1204X-E with all options - thanks also to those people!) and having ordered an FY6900.
So I have a simple question, the answer to which is clearly inferable from this thread, but not stated anywhere I can see - which suggests there may be something I am missing.
It appears from this thread that communication between the CRO and the FY6900 is via WiFi. My Siglent manual clearly states that the AWG connects via USB, and doesn't suggest any options.
What am I missing? Where does the magic happen?

--- End quote ---

What are missing. You have missed to read the User manual.

Here attached, rest you find yourself.
If you have old User manual, first update it. https://www.siglenteu.com/download/10068/




Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod