Products > Test Equipment
Siglent SDS1104X-E In-Depth Review
<< < (5/48) > >>
Geoff-AU:
That's a very thorough review and a LOT of work.  Great stuff   :-+
pascal_sweden:
Is that ever going to happen on this forum? :)


--- Quote from: pascal_sweden on December 13, 2017, 08:36:09 am ---Can you do a detailed review about decoding where you test all the supported protocols, use the full memory depth, and try to search for an event and navigate in the recorded data?

--- End quote ---
tautech:

--- Quote from: pascal_sweden on December 15, 2017, 09:03:50 am ---Is that ever going to happen on this forum? :)


--- Quote from: pascal_sweden on December 13, 2017, 08:36:09 am ---Can you do a detailed review about decoding where you test all the supported protocols, use the full memory depth, and try to search for an event and navigate in the recorded data?

--- End quote ---

--- End quote ---
Excuse me ?
Pull your head in and read reply #1 and #15.
Patience grasshopper.
tautech:
In Pt 4 Trigger:


--- Quote ---AC trigger coupling does not display a trigger level indicator, which I’m not happy with, but Siglent don’t
seem to be willing to change that.

--- End quote ---
This has always baffled me as to why a AC trigger level indicator isn't deemed to be necessary as your findings report:

--- Quote ---The trigger level is set to zero which is actually always equivalent to the mean level of a symmetrical input signal.
--- End quote ---
Furthermore there's no mention in the User manual that no level indicator will be shown or at what the level might be, only this:

AC: block all the DC components and attenuate signals lower than 5.8 Hz. Use AC coupling to get a stable edge trigger when your waveform has a large DC offset.

One might ask for the less experienced user the use of AC trigger coupling could be better described so that it's usage conditions are clear.
What is Siglent's reasoning for no AC trigger level indicator, do you know ?
Peteg:
Just to say good job, enjoyed the review thanks.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod