Author Topic: Tektronix 50R Current Loops for Current Probes  (Read 276 times)

0 Members and 1 Guest are viewing this topic.

Offline calibrationfixtureTopic starter

  • Regular Contributor
  • *
  • Posts: 123
  • Country: nl
Tektronix 50R Current Loops for Current Probes
« on: July 06, 2024, 08:42:10 am »
Hi,

Saw this "little" overpriced Item on eBay:

https://www.ebay.com/itm/285474532694

Cheaper alternatives (DIY is also possible): 015-0601-50 and the old 067-0559-00.

https://www.ebay.com/itm/156271706359

https://www.ebay.com/itm/156284375171

There is also a 015-0601-00, but this is a Short Circuit one. No 50R Termination in the barrel.

Calibrationfixture



« Last Edit: July 06, 2024, 08:53:01 am by calibrationfixture »
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 28931
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Tektronix 50R Current Loops for Current Probes
« Reply #1 on: July 06, 2024, 09:09:55 am »
This serves the same purpose to properly set up a current probe and adjust channel skew.



There's even a thread here for a DIY version.
Avid Rabid Hobbyist.
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline calibrationfixtureTopic starter

  • Regular Contributor
  • *
  • Posts: 123
  • Country: nl
Re: Tektronix 50R Current Loops for Current Probes
« Reply #2 on: July 07, 2024, 06:46:14 am »
Hi again,

I forgot the 067-0865-00 Fixture. This will accommodate the bigger Current Probes:

https://www.ebay.com/itm/276528516623

https://w140.com/tekwiki/images/8/8b/Tek_067-0865-00_datasheet.pdf

Calibrationfixture
« Last Edit: July 07, 2024, 06:47:49 am by calibrationfixture »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf