Author Topic: Siglent SDS1202DL Firmware upgrade  (Read 156 times)

0 Members and 1 Guest are viewing this topic.

Offline evansg

  • Contributor
  • Posts: 10
  • Country: gr
Siglent SDS1202DL Firmware upgrade
« on: October 19, 2019, 04:12:57 pm »
It seems that I uploaded a wrong firmware to my old Siglent SDS1202DL Oscilloscope and now it does not work properly.
I used the SDS1000CFL 2CH Firmware - 5.08.02.38 (Release Date 03.10.15 ) and unfortunately it accepted the wrong firmware.

It boots and all menus/buttons works except the most important thing.. to measure. (I can see a sinusoidal graph after boot in both channel when nothing is present connected to the device)
Anybody has the correct firmware for the SDS1202DL?
Thanks,
Evans
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1040
  • Country: pt
Re: Siglent SDS1202DL Firmware upgrade
« Reply #1 on: October 19, 2019, 07:02:56 pm »
Decompress zip and 7z.
 
The following users thanked this post: tautech

Offline evansg

  • Contributor
  • Posts: 10
  • Country: gr
Re: Siglent SDS1202DL Firmware upgrade
« Reply #2 on: October 19, 2019, 09:06:02 pm »
Thanks man, back to normal
Appreciate your help!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf